ESP32-Custom
nakul-biovaco·ESP32-Custom-PCB
About the ESP32-Custom PCB
ESP32-Custom is an open source ESP32 PCB design by nakul-biovaco, published on GitHub under the MIT license. It is a 4-layer board measuring 28 × 55 mm, with 42 components from 32 distinct parts.
Its main chip is the ESP32-WROOM-32E-N4, from the ESP32 family. Other key parts include the TPS62162DSGR, CP2102N-A02-GQFN28 and USBLC6-2SC6. By type, the board carries 14 capacitors, 13 resistors, 4 ICs, 3 connectors, 2 transistors and 2 switches.
It belongs with the dev boards & breakouts, iot & wireless and power & battery designs in this gallery.
From the project
Production-Grade 4-Layer ESP32-WROOM-32E Custom Development Board with Synchronous Buck Converter & Type-C (KiCad 8/10, JLCPCB PCBA Ready)
The ESP32-WROOM-32E Custom Development Board is an open-source, production-grade 4-layer microcontroller development platform designed for high-reliability embedded IoT applications.
Unlike common low-cost development boards that rely on inefficient linear regulators (such as the AMS1117) and cut corners on USB-C compliance, this design addresses core hardware engineering pain points: - Synchronous Buck Power Architecture: Replaces lossy LDOs with a Texas Instruments TPS62162DSGR 2.25 MHz step-down switching regulator, delivering up to 1.0 A @ 3.3V at >90% efficiency. This completely…

Main components on the ESP32-Custom
ESP32-Custom bill of materials (BOM)
42 components, 32 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TPS62162DSGR Texas Instruments | Texas_DSG0008A_WSON-8-1EP_2x2mm_P0.5mm_EP0.9x1.6mm_ThermalVias | U1 |
| 1 | ESP32-WROOM-32E-N4 Espressif Systems | ESP32-WROOM-32E | U2 |
| 1 | CP2102N-A02-GQFN28 Silicon Laboratories | QFN-28-1EP_5x5mm_P0.5mm_EP3.35x3.35mm | U3 |
| 1 | USBLC6-2SC6 STMicroelectronics | SOT-23-6 | U4 |
| 2 | MMBT3904LT1G MMBT3904 onsemi | SOT-23 | Q1, Q2 |
| 1 | TYPE-C-31-M-12 USB4105-GF-A Korean Hroparts Elec | USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J1 |
| 1 | 61301911121 CONN_LEFT_1x19 Wurth Elektronik | PinHeader_1x19_P2.54mm_Vertical | J2 |
| 1 | 61301911121 CONN_RIGHT_1x19 Wurth Elektronik | PinHeader_1x19_P2.54mm_Vertical | J3 |
| 1 | MF-MSMF075/24-2 MF-MSMF075 750mA Bourns | Fuse_1206_3216Metric | F1 |
| 1 | TS-1187A-C-D-B RESET XKB Enterprise | SW_SPST_PTS810 | SW1 |
| 1 | TS-1187A-C-D-B BOOT XKB Enterprise | SW_SPST_PTS810 | SW2 |
| 1 | SMAJ5.0A SMAJ5.0A TVS Littelfuse | D_SMA | D1 |
| 1 | KP-1608SGC Green 3V3 Kingbright | LED_0603_1608Metric | D2 |
| 1 | 74438335022 2.2uH 2.1A Wuerth Elektronik | L_Wuerth_MAPI-3020 | L1 |
| 2 | GRM21BR71C106KE15L 10uF 16V Murata | C_0805_2012Metric | C1, C2 |
| 2 | GRM155R71C104KA88D 0.1uF 16V Murata | C_0402_1005Metric | C3, C6 |
| 1 | GRM21BR71A226ME15L 22uF 10V Murata | C_0805_2012Metric | C4 |
| 1 | GRM21BR71A106KE15L 10uF 10V Murata | C_0805_2012Metric | C5 |
| 1 | GRM21BR71A106KE15L 10uF Murata | C_0805_2012Metric | C7 |
| 4 | GRM155R71C104KA88D 0.1uF Murata | C_0402_1005Metric | C8, C11, C13, C14 |
Show 12 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | GRM188R71C105KA12D 1uF Murata | C_0603_1608Metric | C9 |
| 1 | GRM21BR71A475KA73L 4.7uF Murata | C_0805_2012Metric | C10 |
| 1 | GRM21BR71C475KE51L 4.7uF Murata | C_0805_2012Metric | C12 |
| 2 | RC0402FR-075K1L 5.1k 1% Yageo | R_0402_1005Metric | R1, R2 |
| 1 | RC0402FR-07100KL 100k Yageo | R_0402_1005Metric | R3 |
| 1 | RC0402FR-071K5L 1.5k Yageo | R_0402_1005Metric | R5 |
| 2 | RC0402FR-0710KL 10k 1% Yageo | R_0402_1005Metric | R6, R7 |
| 2 | RC0402FR-0710KL 10k Yageo | R_0402_1005Metric | R8, R9 |
| 2 | RC0402FR-07470RL 470 1% Yageo | R_0402_1005Metric | R10, R11 |
| 1 | RC0402FR-0722K1L 22.1k Yageo | R_0402_1005Metric | R12 |
| 1 | RC0402FR-0747K5L 47.5k Yageo | R_0402_1005Metric | R13 |
| 1 | RC0402FR-074K7L 4.7k Yageo | R_0402_1005Metric | R14 |
ESP32-Custom design files
The KiCad project lives in the nakul-biovaco/ESP32-Custom-PCB repository on GitHub; these links point at the commit this page was built from.
ESP32-Custom: common questions
What microcontroller does the ESP32-Custom use?
The ESP32-Custom is built around the ESP32-WROOM-32E-N4, from the ESP32 family.
How big is the ESP32-Custom PCB?
The ESP32-Custom measures 28 × 55 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the ESP32-Custom?
42 components, from 32 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the ESP32-Custom design files?
From the nakul-biovaco/ESP32-Custom-PCB repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the ESP32-Custom design in my own project?
Yes, under the terms of its MIT license, which nakul-biovaco chose for the repository.
Can I test firmware for the ESP32-Custom without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k