Adafruit 3.5in 480x320 FeatherWing Rev B
About the Adafruit 3.5in 480x320 FeatherWing Rev B PCB
Adafruit 3.5in 480x320 FeatherWing Rev B is an open source PCB design by NBence0, published on GitHub. It is a 16-layer board measuring 66 × 85.3 mm, with 59 components from 49 distinct parts.
Other key parts include the RESET_SUPERVISORAPX80X_SA, TSC2007PW, RT9742SNGV and 74LVC1G07SE-7. By type, the board carries 11 resistors, 10 capacitors, 6 ICs, 3 diodes, 2 crystals and 1 inductor.
It belongs with the sensors and test & measurement designs in this gallery.
From the project
Welcome to the official GitHub page of JedlikBots! 🎓🤖 We are the dedicated team of software development and robotics students from the Jedlik Ányos Technical School in Győr, Hungary. Our passion is to combine mechanical engineering, electronics, and software development to create
Welcome to the official GitHub page of JedlikBots! 🎓🤖 We are the dedicated team of software development and robotics students from the Jedlik Ányos Technical School in Győr, Hungary. Our passion is to combine mechanical engineering, electronics, and software development to create innovative robotics solutions that address real-world problems. Our goal is to apply our acquired knowledge in national and international competitions and to inspire the next generation of engineers.
Main components on the Adafruit 3.5in 480x320 FeatherWing Rev B
Adafruit 3.5in 480x320 FeatherWing Rev B bill of materials (BOM)
59 components, 49 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | RESET_SUPERVISORAPX80X_SA | SOT23-WIDE | IC1 |
| 1 | TSC2007PW | TSSOP16 | IC2 |
| 1 | RT9742SNGV AP2127K-3.3 | SOT23-5 | U2 |
| 1 | 74LVC1G07SE-7 TPS61169 | SC70-5 | U3 |
| 1 | — | ADAFRUIT_TEXT_30MM | U$19 |
| 1 | — | PCBFEAT-REV-040 | U$37 |
| 1 | 3.5" TFT | TFT_3.5IN_320X480_50PIN | X2 |
| 1 | MicroSD | MICROSD | X3 |
| 1 | STEMMA_I2C_QT | JST_SH4 | CONN1 |
| 1 | Slide Switch | EG1390 | ENABLE0 |
| 1 | A1 | SOLDERJUMPER_ARROW_NOPASTE | ICSP_CLK1 |
| 1 | A0 | SOLDERJUMPER_ARROW_NOPASTE | ICSP_CLK2 |
| 1 | FEATHERWING_SMTDUAL | FEATHERWING_SMT2 | MS2 |
| 1 | — | PLABEL0 | PLABEL0 |
| 1 | — | PLABEL1 | PLABEL1 |
| 1 | — | PLABEL2 | PLABEL2 |
| 1 | — | PLABEL3 | PLABEL3 |
| 1 | — | PLABEL4 | PLABEL4 |
| 1 | — | PLABEL5 | PLABEL5 |
| 1 | — | PLABEL6 | PLABEL6 |
Show 29 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | — | PLABEL7 | PLABEL7 |
| 1 | — | PLABEL8 | PLABEL8 |
| 1 | — | PLABEL9 | PLABEL9 |
| 1 | — | PLABEL10 | PLABEL10 |
| 1 | — | PLABEL11 | PLABEL11 |
| 1 | — | PLABEL12 | PLABEL12 |
| 1 | — | PLABEL13 | PLABEL13 |
| 1 | — | PLABEL14 | PLABEL14 |
| 1 | — | PLABEL15 | PLABEL15 |
| 1 | SPST_RA | SPST_TACTILE_RA | RESET0 |
| 4 | — | SOLDERJUMPER_CLOSEDWIRE | SJ1, SJ2, SJ3, SJ4 |
| 3 | MBR0540 | SOD-123 | D2, D3, D4 |
| 1 | HCM0703-3R3-R 6.8uH | INDUCTOR_5X5MM_NR5040_NOTHERMALS | L1 |
| 1 | 10U 1uF | 0805-NO | C1 |
| 1 | 100UF 10uF | 0805-NO | C2 |
| 2 | 10U 10uF | 0805-NO | C3, C4 |
| 2 | 100N 10uF | 0805-NO | C5, C7 |
| 1 | 100N 0.1uF | 0603-NO | C6 |
| 1 | 470UF 1uF | 0805-NO | C16 |
| 1 | 1UF 0.1uF | 0603-NO | C18 |
| 1 | 1UF 1uF | 0805-NO | C20 |
| 1 | 8.2 ohm | 0603-NO | R1 |
| 1 | 100K | 0603-NO | R2 |
| 3 | 10K | 0603-NO | R3, R4, R9 |
| 2 | 4.7K 100K | 0603-NO | R5, R6 |
| 1 | 10K 100K | 0603-NO | R10 |
| 1 | 100 100K | 0603-NO | R11 |
| 1 | 470R 10K | 0603-NO | R13 |
| 1 | 10K | 0603-NO | R14 |
Adafruit 3.5in 480x320 FeatherWing Rev B design files
The KiCad project lives in the NBence0/JedlikBots repository on GitHub; these links point at the commit this page was built from.
Adafruit 3.5in 480x320 FeatherWing Rev B: common questions
How big is the Adafruit 3.5in 480x320 FeatherWing Rev B PCB?
The Adafruit 3.5in 480x320 FeatherWing Rev B measures 66 × 85.3 mm, has 16 copper layers and is 1.6 mm thick.
How many components are on the Adafruit 3.5in 480x320 FeatherWing Rev B?
59 components, from 49 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Adafruit 3.5in 480x320 FeatherWing Rev B design files?
From the NBence0/JedlikBots repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Adafruit 3.5in 480x320 FeatherWing Rev B design in my own project?
The repository has no license, so all rights stay with NBence0. Use it as a reference, and ask the author before reusing the design.
More boards in JedlikBots
ESP32Felső panel
120.1 × 70.2 mm274 parts6LNo license0
ESP32High speed
140 × 70 mm259 parts6LNo license0
Raspberry PiPsu
140 × 70 mm243 parts6LNo license0
CM5IO
120.1 × 70.2 mm241 parts6LNo license0
Raspberry PiCM5IO második terv
155 × 100 mm174 parts6LNo license0
Raspberry PiCM4IOv5
160 × 90 mm137 parts4LNo license0
Robot fő nyák
100.5 × 100.4 mm71 parts2LNo license0
ESP32CM5IO első terv
140 × 100 mm26 parts2LNo license0
Similar boards
LevelShifter
gusmanb
28.3 × 39.8 mm21 parts2LGPL-3.05.0k
StackLink
52.3 × 10.5 mm5 parts2LGPL-3.05.0k
AnalyzerBoxPCB fork
52.7 × 47.9 mm54 parts4LGPL-3.05.0k
Sensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2k
Sensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8k
Microphone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2k