Pogo object
About the Pogo object PCB
Pogo object is an open source PCB design by nekonaute, published on GitHub under the MIT license. It is a 2-layer board measuring 124 × 124 mm, with 33 components from 15 distinct parts.
Other key parts include the dfr0489, BSR802NL6327HTSA1 and mcp1407. By type, the board carries 10 diodes, 10 resistors, 6 connectors, 4 ICs and 2 capacitors.
It belongs with the robotics & motion and usb & debug tools designs in this gallery.
From the project
Pogobot is an open-source open-hardware robotic platform for swarm robotics
- Hardware - Folder description - Pogobot robot - Hardware schematic - What's needed for 1 robot - Motor information - 3d printed parts - USB UART progboard - Charger - IR remote - IR Wall - Pogobject
The folder : - "3Dmodels" contains the 3D models for Kicad - 'Belly" contains the kicad files for the belly - "Charger" contains the kicad files for the charger - "Footprints.pretty" is the Kicad library for custom footprints - "Head" contains the kicad files for the head - "pogoobject" contains the kicad files for the pogobject - "remote" contains the kicad files for the board which host the…
Main components on the Pogo object
Pogo object bill of materials (BOM)
33 components, 15 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | dfr0489 | dfr0489 | U1 |
| 2 | BSR802NL6327HTSA1 | SOT95P285X135-3N | U2, U4 |
| 1 | mcp1407 | SOIC-8_3.9x4.9mm_P1.27mm | U3 |
| 1 | 10132797-035100LF | 10132797035100LF | J1 |
| 1 | 10132797-015100LF | 10132797015100LF | J2 |
| 2 | Conn_01x02_Male | PinHeader_1x02_P2.54mm_Vertical | J3, J4 |
| 1 | Conn_01x04_Male | PinHeader_1x04_P2.54mm_Vertical | J5 |
| 1 | Conn_01x03_Male | PinHeader_1x03_P2.54mm_Vertical | J6 |
| 1 | R_Potentiometer | PinHeader_1x03_P2.54mm_Vertical | RV1 |
| 10 | LED | D_A-405_P2.54mm_Vertical_AnodeUp | D1, D2, D3, D4, D5, D6, D7, D8 +2 |
| 1 | 1uF | CP_Radial_D8.0mm_P5.00mm | C1 |
| 1 | 0.1uF | CP_Radial_D8.0mm_P5.00mm | C2 |
| 2 | 47K | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2 |
| 3 | 100K | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3, R9, R10 |
| 5 | 36 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4, R5, R6, R7, R8 |
Pogo object design files
The KiCad project lives in the nekonaute/pogobot repository on GitHub; these links point at the commit this page was built from.
Pogo object: common questions
How big is the Pogo object PCB?
The Pogo object measures 124 × 124 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Pogo object?
33 components, from 15 distinct parts. The full bill of materials is listed on this page.
Where can I download the Pogo object design files?
From the nekonaute/pogobot repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Pogo object design in my own project?
Yes, under the terms of its MIT license, which nekonaute chose for the repository.
More boards in pogobot
FPGAPogobot Head
43.2 × 43.2 mm129 parts4LMIT21
Pogobot belly
37.5 × 41.5 mm31 parts2LMIT21
Bellyv2
37.5 × 41.5 mm29 parts2LMIT21
Remote leds wall strip
305 × 9 mm27 parts2LMIT21
Remote leds strip
100.7 × 100.7 mm24 parts2LMIT21
Charger board for 12 Pogobots
245 × 200 mm22 parts2LMIT21
Remote leds wall strip 12v
305.1 × 9 mm18 parts2LMIT21
Remote leds wall ctrl
47 × 31 mm11 parts2LMIT21
Remote
56 × 80 mm9 parts2LMIT21
Progboard
40 × 27.4 mm4 parts2LMIT21
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7k
Cube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1k
Triple adapter
rene-dev
57 × 75 mm26 parts2LGPL-3.0979
Bob
100 × 100 mm140 parts2LGPL-3.0979
Mesabob
87.5 × 50 mm44 parts2LGPL-3.0979
Trollerv2
100 × 75 mm33 parts4LGPL-3.0979