Remote leds wall ctrl

nekonaute·pogobot·Hardware/remote_leds_wall_ctrl/remote_leds_wall_ctrl.kicad_pcb

Remote leds wall ctrl PCB layout, top view — open source board by nekonaute

Simulate this board

About the Remote leds wall ctrl PCB

Remote leds wall ctrl is an open source PCB design by nekonaute, published on GitHub under the MIT license. It is a 2-layer board measuring 47 × 31 mm, with 11 components from 11 distinct parts.

Other key parts include the mcp1407. By type, the board carries 4 capacitors, 2 connectors, 2 resistors, 1 IC and 1 transistor.

It belongs with the robotics & motion and usb & debug tools designs in this gallery.

From the project

Pogobot is an open-source open-hardware robotic platform for swarm robotics

- Hardware - Folder description - Pogobot robot - Hardware schematic - What's needed for 1 robot - Motor information - 3d printed parts - USB UART progboard - Charger - IR remote - IR Wall - Pogobject

The folder : - "3Dmodels" contains the 3D models for Kicad - 'Belly" contains the kicad files for the belly - "Charger" contains the kicad files for the charger - "Footprints.pretty" is the Kicad library for custom footprints - "Head" contains the kicad files for the head - "pogoobject" contains the kicad files for the pogobject - "remote" contains the kicad files for the board which host the…

Remote leds wall ctrl, from the project README — From the project README

Main components on the Remote leds wall ctrl

Remote leds wall ctrl bill of materials (BOM)

11 components, 11 distinct parts.

Qty	Part	Footprint	Refs
1	mcp1407	SOIC-8_3.9x4.9mm_P1.27mm	U2
1	BSR802NL6327HTSA1	SOT-23	Q2
1	Conn_01x03_Male	PinHeader_1x03_P2.54mm_Vertical	J1
1	Conn_01x02_Female	PinHeader_1x02_P2.54mm_Vertical	J2
1	100	PinHeader_1x03_P2.54mm_Vertical	RV1
1	1uF	C_0805_2012Metric_Pad1.18x1.45mm_HandSolder	C1
1	0.1uF	C_0805_2012Metric_Pad1.18x1.45mm_HandSolder	C2
1	1uF	CP_Radial_D5.0mm_P2.00mm	C3
1	0.1uF	CP_Radial_D5.0mm_P2.00mm	C4
1	100K	R_0805_2012Metric_Pad1.20x1.40mm_HandSolder	R6
1	1OOk	R_0805_2012Metric_Pad1.20x1.40mm_HandSolder	R7

Remote leds wall ctrl design files

The KiCad project lives in the nekonaute/pogobot repository on GitHub; these links point at the commit this page was built from.

Remote leds wall ctrl: common questions

How big is the Remote leds wall ctrl PCB?

The Remote leds wall ctrl measures 47 × 31 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Remote leds wall ctrl?

11 components, from 11 distinct parts. The full bill of materials is listed on this page.

Where can I download the Remote leds wall ctrl design files?

From the nekonaute/pogobot repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Remote leds wall ctrl design in my own project?

Yes, under the terms of its MIT license, which nekonaute chose for the repository.

More boards in pogobot

Similar boards