HardLabs

Remote leds wall strip

nekonaute·pogobot·Hardware/remote_leds_wall_strip/remote_leds_wall_strip.kicad_pcb

Remote leds wall strip PCB layout, top view — open source board by nekonaute
Simulate this board

About the Remote leds wall strip PCB

Remote leds wall strip is an open source PCB design by nekonaute, published on GitHub under the MIT license. It is a 2-layer board measuring 305 × 9 mm, with 27 components from 2 distinct parts.

By type, the board carries 18 inductors and 9 resistors.

It belongs with the robotics & motion and usb & debug tools designs in this gallery.

From the project

Pogobot is an open-source open-hardware robotic platform for swarm robotics

- Hardware - Folder description - Pogobot robot - Hardware schematic - What's needed for 1 robot - Motor information - 3d printed parts - USB UART progboard - Charger - IR remote - IR Wall - Pogobject

The folder : - "3Dmodels" contains the 3D models for Kicad - 'Belly" contains the kicad files for the belly - "Charger" contains the kicad files for the charger - "Footprints.pretty" is the Kicad library for custom footprints - "Head" contains the kicad files for the head - "pogoobject" contains the kicad files for the pogobject - "remote" contains the kicad files for the board which host the…

Remote leds wall strip, from the project README
From the project README

Remote leds wall strip bill of materials (BOM)

27 components, 2 distinct parts.

QtyPartRefs
18
VSMB3940X01-GS08
L1, L2, L3, L4, L5, L6, L7, L8 +10
9
36
R1, R2, R3, R4, R5, R6, R7, R8 +1

Remote leds wall strip design files

The KiCad project lives in the nekonaute/pogobot repository on GitHub; these links point at the commit this page was built from.

Remote leds wall strip: common questions

How big is the Remote leds wall strip PCB?

The Remote leds wall strip measures 305 × 9 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Remote leds wall strip?

27 components, from 2 distinct parts. The full bill of materials is listed on this page.

Where can I download the Remote leds wall strip design files?

From the nekonaute/pogobot repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Remote leds wall strip design in my own project?

Yes, under the terms of its MIT license, which nekonaute chose for the repository.

More boards in pogobot

Similar boards