Remote
About the Remote PCB
Remote is an open source PCB design by nekonaute, published on GitHub under the MIT license. It is a 2-layer board measuring 56 × 80 mm, with 9 components from 6 distinct parts.
Other key parts include the umft234xf_module. By type, the board carries 8 connectors and 1 IC.
It belongs with the robotics & motion and usb & debug tools designs in this gallery.
From the project
Pogobot is an open-source open-hardware robotic platform for swarm robotics
- Hardware - Folder description - Pogobot robot - Hardware schematic - What's needed for 1 robot - Motor information - 3d printed parts - USB UART progboard - Charger - IR remote - IR Wall - Pogobject
The folder : - "3Dmodels" contains the 3D models for Kicad - 'Belly" contains the kicad files for the belly - "Charger" contains the kicad files for the charger - "Footprints.pretty" is the Kicad library for custom footprints - "Head" contains the kicad files for the head - "pogoobject" contains the kicad files for the pogobject - "remote" contains the kicad files for the board which host the…
Main components on the Remote
Remote bill of materials (BOM)
9 components, 6 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | umft234xf_module | umft234xf | U1 |
| 1 | 10132797-035100LF | 10132797035100LF | J1 |
| 1 | 10132797-015100LF | 10132797015100LF | J2 |
| 1 | Barrel_Jack_Switch | Barrel Jack_SparkFun_PRT-10811 | J3 |
| 4 | Conn_01x03_Male | PinHeader_1x03_P2.54mm_Vertical | J4, J5, J6, J7 |
| 1 | Conn_02x04_Counter_Clockwise | PinHeader_2x04_P2.54mm_Vertical | J8 |
Remote design files
The KiCad project lives in the nekonaute/pogobot repository on GitHub; these links point at the commit this page was built from.
Remote: common questions
How big is the Remote PCB?
The Remote measures 56 × 80 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Remote?
9 components, from 6 distinct parts. The full bill of materials is listed on this page.
Where can I download the Remote design files?
From the nekonaute/pogobot repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Remote design in my own project?
Yes, under the terms of its MIT license, which nekonaute chose for the repository.
More boards in pogobot
FPGAPogobot Head
43.2 × 43.2 mm129 parts4LMIT21
Pogo object
124 × 124 mm33 parts2LMIT21
Pogobot belly
37.5 × 41.5 mm31 parts2LMIT21
Bellyv2
37.5 × 41.5 mm29 parts2LMIT21
Remote leds wall strip
305 × 9 mm27 parts2LMIT21
Remote leds strip
100.7 × 100.7 mm24 parts2LMIT21
Charger board for 12 Pogobots
245 × 200 mm22 parts2LMIT21
Remote leds wall strip 12v
305.1 × 9 mm18 parts2LMIT21
Remote leds wall ctrl
47 × 31 mm11 parts2LMIT21
Progboard
40 × 27.4 mm4 parts2LMIT21
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7k
Cube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1k
Triple adapter
rene-dev
57 × 75 mm26 parts2LGPL-3.0979
Bob
100 × 100 mm140 parts2LGPL-3.0979
Mesabob
87.5 × 50 mm44 parts2LGPL-3.0979
Trollerv2
100 × 75 mm33 parts4LGPL-3.0979