CustomPCBv1
Nero-gif·Linefollower·LF_3.0 - 26inter/KiCad/customPCBv1/customPCBv1.kicad_pcb
About the CustomPCBv1 PCB
CustomPCBv1 is an open source ESP32 PCB design by Nero-gif, published on GitHub. It is a 2-layer board measuring 54.8 × 60.8 mm, with 40 components from 33 distinct parts.
Its main chip is the ESP32-S3-WROOM-1, from the ESP32 family. Other key parts include the DRV8870DDA_Motor_L, DRV8870DDA_Motor_R, TPS5430DDA, AMS1117-3.3 and MCP3008. By type, the board carries 11 resistors, 7 capacitors, 6 ICs, 5 connectors, 4 diodes and 3 switches.
Main components on the CustomPCBv1
CustomPCBv1 bill of materials (BOM)
40 components, 33 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-S3-WROOM-1 | ESP32-S3-WROOM-1 | U1 |
| 1 | DRV8870DDA_Motor_L | Texas_HTSOP-8-1EP_3.9x4.9mm_P1.27mm_EP2.95x4.9mm_Mask2.4x3.1mm_ThermalVias | U2 |
| 1 | DRV8870DDA_Motor_R | Texas_HTSOP-8-1EP_3.9x4.9mm_P1.27mm_EP2.95x4.9mm_Mask2.4x3.1mm_ThermalVias | U3 |
| 1 | TPS5430DDA | TI_SO-PowerPAD-8_ThermalVias | U4 |
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U5 |
| 1 | MCP3008 | SOIC-16_3.9x9.9mm_P1.27mm | U6 |
| 1 | Motor_L | TerminalBlock_MaiXu_MX126-5.0-02P_1x02_P5.00mm | M1 |
| 1 | Motor_R | TerminalBlock_MaiXu_MX126-5.0-02P_1x02_P5.00mm | M2 |
| 1 | AO4407 | SOIC-8_3.9x4.9mm_P1.27mm | Q1 |
| 1 | BAT_IN | AMASS_XT60-F_1x02_P7.20mm_Vertical | J1 |
| 1 | USB_C_RECEPTACLE_USB2.0_16P USB_C_Receptacle_USB2.0_16P | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J2 |
| 1 | Conn_01x12 | PinHeader_1x12_P2.54mm_Horizontal | J3 |
| 1 | CONN_02X12_ODD_EVEN Turbine | PinHeader_1x03_P2.54mm_Vertical | J4 |
| 1 | ARM_SW | PinHeader_1x02_P2.54mm_Vertical | J5 |
| 1 | SW_SPDT_POWER | SW_SPDT_PCM12 | SW1 |
| 1 | SW_Push_RESET | SW_SPST_B3U-1000P | SW2 |
| 1 | SW_Push_BOOT | SW_SPST_B3U-1000P | SW3 |
| 2 | D_SCHOTTKY_SS34 D_Schottky_SS34 | D_SMA | D1, D3 |
| 1 | LED_STATUS | LED_0603_1608Metric | D2 |
| 1 | LED_POWER | LED_0603_1608Metric | D4 |
Show 13 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | L_33UH L_33uH | L_Taiyo-Yuden_NR-60xx | L1 |
| 1 | C_10NF C_10nF | C_0603_1608Metric | C2 |
| 2 | C_POLARIZED_10UF C_Polarized_10uF | C_1206_3216Metric | C4, C8 |
| 1 | C_POLARIZED_220UF C_Polarized_220uF | CP_Elec_6.3x5.4 | C5 |
| 1 | C_POLARIZED_22UF C_Polarized_22uF | C_1206_3216Metric | C6 |
| 1 | C_1UF C_1uF | C_0603_1608Metric | C7 |
| 1 | C_100NF C_100nF | C_0603_1608Metric | C9 |
| 5 | R_10K R_10k | R_0603_1608Metric | R1, R4, R5, R6, R8 |
| 2 | R_5.1K R_5.1k | R_0603_1608Metric | R2, R7 |
| 1 | R__3.24K R__3.24k | R_0603_1608Metric | R3 |
| 1 | R_2.2K R_2.2k | R_0603_1608Metric | R9 |
| 1 | R_330 | R_0603_1608Metric | R10 |
| 1 | R_1K R_1k | R_0603_1608Metric | R11 |
CustomPCBv1 design files
The KiCad project lives in the Nero-gif/Linefollower repository on GitHub; these links point at the commit this page was built from.
CustomPCBv1: common questions
What microcontroller does the CustomPCBv1 use?
The CustomPCBv1 is built around the ESP32-S3-WROOM-1, from the ESP32 family.
How big is the CustomPCBv1 PCB?
The CustomPCBv1 measures 54.8 × 60.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the CustomPCBv1?
40 components, from 33 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the CustomPCBv1 design files?
From the Nero-gif/Linefollower repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the CustomPCBv1 design in my own project?
The repository has no license, so all rights stay with Nero-gif. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the CustomPCBv1 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in Linefollower
Earlier revisions in the repo: customPCB
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k