LinefollowerV4manual
Nero-gif·Linefollower·LF_3.0 - 26inter/KiCad/LinefollowerV4/LinefollowerV4manual.kicad_pcb
About the LinefollowerV4manual PCB
LinefollowerV4manual is an open source ESP32 PCB design by Nero-gif, published on GitHub. It is a 2-layer board measuring 94 × 74.2 mm, with 26 components from 24 distinct parts.
Its main chip is the ESP32-S3-WROOM-1, from the ESP32 family. Other key parts include the DRV8871 Breakout Board, TSR_1-2450 and TPS5430DDA. By type, the board carries 7 connectors, 5 resistors, 4 ICs, 4 capacitors, 3 switches and 2 diodes.
Main components on the LinefollowerV4manual
LinefollowerV4manual bill of materials (BOM)
26 components, 24 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-S3-WROOM-1 Teensy4.1 | Teensy41 | U1 |
| 1 | DRV8871 Breakout Board | DRV8871 Breakout Board | U2 |
| 1 | TSR_1-2450 | Converter_DCDC_TRACO_TSR-1_THT | U3 |
| 1 | TPS5430DDA DRV8871 Breakout Board | DRV8871 Breakout Board | U4 |
| 1 | AO4407 IRLZ44N | TO-220-3_Vertical | Q1 |
| 1 | Conn_01x02 | AMASS_XT60-M_1x02_P7.20mm_Vertical | J1 |
| 1 | USB_C_RECEPTACLE_USB2.0_16P JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J2 |
| 1 | Polulu 25d gearmotor encoder | IDC-Header_2x06_P2.54mm_Vertical | J3 |
| 1 | CONN_02X12_ODD_EVEN Conn_01x24 | PinHeader_1x24_P2.54mm_Vertical | J4 |
| 1 | Conn_01x24 | PinHeader_1x24_P2.54mm_Vertical | J5 |
| 1 | Conn_02x08_ArduCam_Himax_HM01B0 | IDC-Header_2x08_P2.54mm_Vertical | J6 |
| 1 | Conn_02x12_Odd_Even | IDC-Header_2x12_P2.54mm_Vertical_3D | J7 |
| 3 | SW_SPDT | SW_Slide_SPDT_Angled_CK_OS102011MA1Q | SW1, SW2, SW3 |
| 1 | D_SCHOTTKY_SS34 LED | LED_D5.0mm | D1 |
| 1 | LED_RKGB | LED_RKBG_D5.0mm-4_RGB | D2 |
| 1 | 100µF / 25V | CP_Radial_D6.3mm_P2.50mm | C1 |
| 1 | C_10NF 10µF / 16V | CP_Radial_D5.0mm_P2.00mm | C2 |
| 1 | 100nF | C_Disc_D5.0mm_W2.5mm_P2.50mm | C3 |
| 1 | C_POLARIZED_10UF 100nF | C_Disc_D5.0mm_W2.5mm_P2.50mm | C4 |
| 1 | R_10K 100ohm | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
Show 4 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | R_5.1K R | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2 |
| 1 | R__3.24K 100ohm | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3 |
| 1 | R_10K 10k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R4 |
| 1 | R_10K 1k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R5 |
LinefollowerV4manual design files
The KiCad project lives in the Nero-gif/Linefollower repository on GitHub; these links point at the commit this page was built from.
LinefollowerV4manual: common questions
What microcontroller does the LinefollowerV4manual use?
The LinefollowerV4manual is built around the ESP32-S3-WROOM-1, from the ESP32 family.
How big is the LinefollowerV4manual PCB?
The LinefollowerV4manual measures 94 × 74.2 mm, has 2 copper layers and is 1.5 mm thick.
How many components are on the LinefollowerV4manual?
26 components, from 24 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the LinefollowerV4manual design files?
From the Nero-gif/Linefollower repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the LinefollowerV4manual design in my own project?
The repository has no license, so all rights stay with Nero-gif. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the LinefollowerV4manual without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in Linefollower
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k