LinefollowerV4

Nero-gif·Linefollower·LF_3.0 - 26inter/KiCad/LinefollowerV4/LinefollowerV4.kicad_pcb

LinefollowerV4 PCB layout, top view — open source ESP32 board by Nero-gif

About the LinefollowerV4 PCB

LinefollowerV4 is an open source ESP32 PCB design by Nero-gif, published on GitHub. It is a 2-layer board measuring 94 × 74.2 mm, with 26 components from 24 distinct parts.

Its main chip is the ESP32-S3-WROOM-1, from the ESP32 family. Other key parts include the DRV8871 Breakout Board, TSR_1-2450 and TPS5430DDA. By type, the board carries 7 connectors, 5 resistors, 4 ICs, 4 capacitors, 3 switches and 2 diodes.

Main components on the LinefollowerV4

LinefollowerV4 bill of materials (BOM)

26 components, 24 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ESP32-S3-WROOM-1
Teensy4.1
U1
1
DRV8871 Breakout Board
U2
1
TSR_1-2450
U3
1
TPS5430DDA
DRV8871 Breakout Board
U4
1
AO4407
IRLZ44N
Q1
1
Conn_01x02
J1
1
USB_C_RECEPTACLE_USB2.0_16P
JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical
J2
1
Polulu 25d gearmotor encoder
J3
1
CONN_02X12_ODD_EVEN
Conn_01x24
J4
1
Conn_01x24
J5
1
Conn_02x08_ArduCam_Himax_HM01B0
J6
1
Conn_02x12_Odd_Even
J7
3
SW_SPDT
SW1, SW2, SW3
1
D_SCHOTTKY_SS34
LED
D1
1
LED_RKGB
D2
1
100µF / 25V
C1
1
C_10NF
10µF / 16V
C2
1
100nF
C3
1
C_POLARIZED_10UF
100nF
C4
1
R_10K
100ohm
R1
Show 4 more
QtyPartRefs
1
R_5.1K
R
R2
1
R__3.24K
100ohm
R3
1
R_10K
10k
R4
1
R_10K
1k
R5

LinefollowerV4 design files

The KiCad project lives in the Nero-gif/Linefollower repository on GitHub; these links point at the commit this page was built from.

LinefollowerV4: common questions

What microcontroller does the LinefollowerV4 use?

The LinefollowerV4 is built around the ESP32-S3-WROOM-1, from the ESP32 family.

How big is the LinefollowerV4 PCB?

The LinefollowerV4 measures 94 × 74.2 mm, has 2 copper layers and is 1.5 mm thick.

How many components are on the LinefollowerV4?

26 components, from 24 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the LinefollowerV4 design files?

From the Nero-gif/Linefollower repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the LinefollowerV4 design in my own project?

The repository has no license, so all rights stay with Nero-gif. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the LinefollowerV4 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in Linefollower

Similar boards