Pocket ebook reader
niyoseris·pocket-ebook-reader·hardware/schematic/pocket-reader.net
About the Pocket ebook reader PCB
Pocket ebook reader is an open source ESP32 PCB design by niyoseris, published on GitHub under the MIT license. It is a board, with 64 components from 32 distinct parts.
Its main chip is the ESP32-C3-MINI-1-N4, from the ESP32 family. Other key parts include the USBLC6-2SC6, MCP73831T-2ACI/OT and TPS63020DSJR. By type, the board carries 28 capacitors, 17 resistors, 4 ICs, 4 switches, 4 diodes and 2 connectors.
It belongs with the displays & leds, iot & wireless and power & battery designs in this gallery.
From the project
Pocket-sized e-ink book reader: ESP32-C3, 2.13" 250x122 e-paper, 62 x 32 x 13 mm. Open hardware + firmware, everything generated from single sources.
An open-source e-ink ebook reader you can carry in a pocket.
62 × 32 × 13 mm · 2.13" e-paper (250×122) · ESP32-C3 · 1S Li-Po · USB-C ~0.3 s page turn · 28–55 µA deep sleep · 12–24 months standby on 500 mAh
Hardware · Software · Quick start · Docs
A pocket-sized e-ink reader. Its purpose is reading a few pages without taking your phone out of your pocket: no backlight, no eye strain, and a charge that lasts for weeks.
Main components on the Pocket ebook reader
Pocket ebook reader bill of materials (BOM)
64 components, 32 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | USBLC6-2SC6 | SOT-23-6 | U1 |
| 1 | MCP73831T-2ACI/OT | SOT-23-5 | U2 |
| 1 | TPS63020DSJR | VSON-14-1EP_3x4mm_P0.5mm | U3 |
| 1 | ESP32-C3-MINI-1-N4 | ESP32-C3-MINI-1 | U5 |
| 1 | Si1308EDL | SOT-323_SC-70 | Q2 |
| 1 | USB-C 16P | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 1 | FPC 24P 0.5mm | Hirose_FH12-24S-0.5SH_1x24-1MP_P0.50mm_Horizontal | J2 |
| 1 | Li-Po 1S 500mAh | JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal | BT1 |
| 1 | 0R bridge | SolderJumper_2_Open | JP1 |
| 1 | SPDT slide | SW_SPDT_PCM12 | SW1 |
| 3 | tactile | SW_SPST_PTS645 | SW2, SW3, SW4 |
| 1 | green 0603 | LED_0603_1608Metric | D1 |
| 3 | MBR0530 | D_SOD-123 | D2, D3, D4 |
| 1 | 1.5uH | L_Bourns-SRN3015 | L1 |
| 1 | 47uH/500mA | L_Bourns-SRN4018 | L2 |
| 2 | 4.7uF | C_0805_2012Metric | C1, C2 |
| 3 | 10uF | C_0805_2012Metric | C3, C4, C11 |
| 3 | 0.1uF | C_0603_1608Metric | C5, C9, C12 |
| 3 | 22uF | C_0805_2012Metric | C6, C7, C8 |
| 1 | 1uF | C_0603_1608Metric | C10 |
Show 12 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 9 | 1uF/25V | C_0805_2012Metric | C13, C14, C15, C16, C17, C18, C19, C20 +1 |
| 2 | 4.7uF/25V | C_0805_2012Metric | C21, C23 |
| 1 | 100uF | C_1206_3216Metric | C22 |
| 4 | 100nF | C_0603_1608Metric | C25, C26, C27, C28 |
| 2 | 5.1k | R_0805_2012Metric | R1, R2 |
| 1 | 2k | R_0805_2012Metric | R3 |
| 1 | 470R | R_0805_2012Metric | R4 |
| 2 | 1M | R_0603_1608Metric | R5, R18 |
| 1 | 180k | R_0603_1608Metric | R6 |
| 8 | 100k | R_0603_1608Metric | R7, R9, R10, R13, R14, R15, R16, R17 |
| 1 | 10k | R_0603_1608Metric | R8 |
| 1 | 2.2R | R_0805_2012Metric | R19 |
Pocket ebook reader design files
The KiCad project lives in the niyoseris/pocket-ebook-reader repository on GitHub; these links point at the commit this page was built from.
Pocket ebook reader: common questions
What microcontroller does the Pocket ebook reader use?
The Pocket ebook reader is built around the ESP32-C3-MINI-1-N4, from the ESP32 family.
How many components are on the Pocket ebook reader?
64 components, from 32 distinct parts. The full bill of materials is listed on this page.
Where can I download the Pocket ebook reader design files?
From the niyoseris/pocket-ebook-reader repository on GitHub, which has a netlist; the links under Design files point to each one.
Can I use the Pocket ebook reader design in my own project?
Yes, under the terms of its MIT license, which niyoseris chose for the repository.
Can I test firmware for the Pocket ebook reader without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k