Orbita26
notazizelse·Orbita26·hardware/kicad/Orbita26.kicad_sch

About the Orbita26 PCB
Orbita26 is an open source PCB design by notazizelse, published on GitHub. It is a board, with 41 components from 22 distinct parts.
Other key parts include the TCRT5000, MCP6002-xP and LM393. By type, the board carries 14 resistors, 10 capacitors, 9 connectors, 3 ICs and 1 transistor.
It belongs with the rf & radio, sensors and science & space designs in this gallery.
From the project
A CubeSat PCB for the international Orbita competition 2026 season
Measuring a living snail's heartbeat in the stratosphere. International Space Tournament Orbita 2026 · 3U CubeSat on the IntroSat.Platform · Team mentor: Ezoza Yuldosheva · Electronics and firmware: Azizbek No'monjonov
We fly a garden snail (Cornu aspersum) to about 24 km. An infrared sensor glued to its shell watches the heart beat through the shell. An analog band-pass amplifier pulls out the tiny signal. The satellite's flight controller counts the beats and radios them to the ground every 2 seconds. Meanwhile a heater keeps the snail's box at 20 °C, and a hardware cutoff protects it even…
Main components on the Orbita26
Orbita26 bill of materials (BOM)
41 components, 22 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TCRT5000 | Vishay_CNY70 | U1 |
| 1 | MCP6002-xP | U2 | |
| 1 | LM393 | U5 | |
| 1 | IRLZ44N | TO-220-3_Vertical | Q1 |
| 1 | Conn_1x4 | JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J1 |
| 2 | Conn_01x02 | J2, J3 | |
| 3 | Conn_01x04 | JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J4, J7, J9 |
| 1 | Conn_01x03 | J5 | |
| 2 | Conn_01x05 | J6, J8 | |
| 1 | 10k | RV2 | |
| 1 | 50k | RV3 | |
| 2 | TH_NTC | TH1, TH2 | |
| 1 | 470n | C2 | |
| 5 | 100n | C3, C5, C7, C8, C9 | |
| 3 | 10u | C4, C6, C10 | |
| 1 | 1u | C11 | |
| 1 | 220 | R1 | |
| 3 | 1k | R3, R11, R16 | |
| 5 | 10k | R6, R7, R12, R13, R18 | |
| 3 | 150 | R8, R9, R10 |
Show 2 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 1M | R15 | |
| 1 | 100k | R17 |
Orbita26 design files
The KiCad project lives in the notazizelse/Orbita26 repository on GitHub; these links point at the commit this page was built from.
Orbita26: common questions
How many components are on the Orbita26?
41 components, from 22 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Orbita26 design files?
From the notazizelse/Orbita26 repository on GitHub, which has the schematic and the BOM; the links under Design files point to each one.
Can I use the Orbita26 design in my own project?
The repository has no license, so all rights stay with notazizelse. Use it as a reference, and ask the author before reusing the design.
Similar boards
Sensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2kSensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8kMicrophone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kUSB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956Pots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956