Proto harness
Okohedeki·proto-harness·examples/soil-sensor/hardware/main.net
About the Proto harness PCB
Proto harness is an open source ESP32 PCB design by Okohedeki, published on GitHub under the MIT license. It is a board, with 29 components from 19 distinct parts.
Its main chip is the ESP32-C3-MINI-1-N4, from the ESP32 family. Other key parts include the TP4056, TPS63020DSJR, SHT40-AD1B-R2 and LMV321IDBVR. By type, the board carries 11 resistors, 9 capacitors, 5 ICs, 3 connectors and 1 inductor.
It belongs with the power & battery and sensors designs in this gallery.
From the project
One place for a whole hardware device. You describe the device in a single device.yaml: requirements, subsystems, interfaces, power, parts, boards, enclosure, firmware, certification and manufacturing. Every stage has a gate made of deterministic checks, so an AI assistant (or a
One place for a whole hardware device. You describe the device in a single device.yaml: requirements, subsystems, interfaces, power, parts, boards, enclosure, firmware, certification and manufacturing. Every stage has a gate made of deterministic checks, so an AI assistant (or a person) can propose designs quickly and the harness decides whether they hold up.
Main components on the Proto harness
Proto harness bill of materials (BOM)
29 components, 19 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TP4056 | ESOP-8 | U1 |
| 1 | TPS63020DSJR TPS63020 | VSON-14 | U2 |
| 1 | ESP32-C3-MINI-1-N4 ESP32-C3-MINI-1 | ESP32-C3-MINI-1 | U3 |
| 1 | SHT40-AD1B-R2 SHT40 | DFN-4_1.5x1.5mm | U4 |
| 1 | LMV321IDBVR LMV321 | SOT-23-5 | U5 |
| 1 | TYPE-C-31-M-12 USB_C | USB_C_16P | J1 |
| 1 | BATT | JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal | J2 |
| 1 | PROBE | JST_PH_S3B-PH-K_1x03_P2.00mm_Horizontal | J3 |
| 1 | 1u5 | L_1210_3225Metric | L1 |
| 4 | 10u | C_0805_2012Metric | C1, C2, C3, C6 |
| 1 | 22u | C_0805_2012Metric | C4 |
| 1 | 1u | C_0402_1005Metric | C5 |
| 3 | 100n | C_0402_1005Metric | C7, C8, C9 |
| 2 | 5k1 | R_0402_1005Metric | R1, R2 |
| 1 | 2k | R_0402_1005Metric | R3 |
| 4 | 1M | R_0402_1005Metric | R4, R7, R8, R11 |
| 1 | 180k | R_0402_1005Metric | R5 |
| 1 | 10k | R_0402_1005Metric | R6 |
| 2 | 4k7 | R_0402_1005Metric | R9, R10 |
Proto harness design files
The KiCad project lives in the Okohedeki/proto-harness repository on GitHub; these links point at the commit this page was built from.
Proto harness: common questions
What microcontroller does the Proto harness use?
The Proto harness is built around the ESP32-C3-MINI-1-N4, from the ESP32 family.
How many components are on the Proto harness?
29 components, from 19 distinct parts. The full bill of materials is listed on this page.
Where can I download the Proto harness design files?
From the Okohedeki/proto-harness repository on GitHub, which has a netlist; the links under Design files point to each one.
Can I use the Proto harness design in my own project?
Yes, under the terms of its MIT license, which Okohedeki chose for the repository.
Can I test firmware for the Proto harness without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k