5 Piece Gas Sensor Mounting Board
About the 5 Piece Gas Sensor Mounting Board
5 Piece Gas Sensor Mounting Board is an open source PCB design by owenpmorgan, published on GitHub. It is a 2-layer board measuring 50.5 × 49.5 mm, with 17 components from 13 distinct parts.
By type, the board carries 12 connectors and 5 ICs.
It belongs with the rf & radio and sensors designs in this gallery.
From the project
The motivation for this project is to create an electronic nose system using a low cost device. Essentially this means using an MCU rather than a small board computer (SBC) like MyRio or Raspberry Pi.
The motivation for this project is to create an electronic nose system using a low cost device. Essentially this means using an MCU rather than a small board computer (SBC) like MyRio or Raspberry Pi.
The benefits of using an SBC are that inference (that is, running the model on a new input to classify it) can stay in the realm in which models are built and a single script or two can take care of the whole model for both training and inference, via tools such as Matlab, Octave, LabView, TensorFlow etc.
5 Piece Gas Sensor Mounting Board bill of materials (BOM)
17 components, 13 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 5 | ~ | TGS2600 | U1, U2, U3, U4, U5 |
| 1 | Sensor1+ | Generic_THT_Solder_Pad_Hole_0.8mmDia | J1 |
| 1 | Sensor2+ | Generic_THT_Solder_Pad_Hole_0.8mmDia | J2 |
| 1 | Sensor3+ | Generic_THT_Solder_Pad_Hole_0.8mmDia | J3 |
| 1 | Sensor4+ | Generic_THT_Solder_Pad_Hole_0.8mmDia | J4 |
| 1 | Sensor5+ | Generic_THT_Solder_Pad_Hole_0.8mmDia | J5 |
| 1 | Sensor5- | Generic_THT_Solder_Pad_Hole_0.8mmDia | J6 |
| 1 | Heater + | Generic_THT_Solder_Pad_Hole_1.5mmDia | J7 |
| 1 | Heater - | Generic_THT_Solder_Pad_Hole_1.5mmDia | J8 |
| 1 | Sensor4- | Generic_THT_Solder_Pad_Hole_0.8mmDia | J9 |
| 1 | Sensor3- | Generic_THT_Solder_Pad_Hole_0.8mmDia | J10 |
| 1 | Sensor2- | Generic_THT_Solder_Pad_Hole_0.8mmDia | J11 |
| 1 | Sensor1- | Generic_THT_Solder_Pad_Hole_0.8mmDia | J12 |
5 Piece Gas Sensor Mounting Board design files
The KiCad project lives in the owenpmorgan/STM_Based_Electronic_Nose_Platform repository on GitHub; these links point at the commit this page was built from.
5 Piece Gas Sensor Mounting Board: common questions
How big is the 5 Piece Gas Sensor Mounting Board?
The 5 Piece Gas Sensor Mounting Board measures 50.5 × 49.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the 5 Piece Gas Sensor Mounting Board?
17 components, from 13 distinct parts. The full bill of materials is listed on this page.
Where can I download the 5 Piece Gas Sensor Mounting Board design files?
From the owenpmorgan/STM_Based_Electronic_Nose_Platform repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the 5 Piece Gas Sensor Mounting Board design in my own project?
The repository has no license, so all rights stay with owenpmorgan. Use it as a reference, and ask the author before reusing the design.
More boards in STM_Based_Electronic_Nose_Platform
![Top view of GIC Array[5]](https://hip.fly.dev/v1/gallery/thumb/owenpmorgan--stm-based-electronic-nose-platform--gic-array-5.svg)
GIC Array[5]
104.8 × 66.6 mm75 parts2LNo license0![Top view of GIC Array[5] complete not optimised](https://hip.fly.dev/v1/gallery/thumb/owenpmorgan--stm-based-electronic-nose-platform--gic-array-5-complete-not-optimised.svg)
GIC Array[5] complete not optimised
104.8 × 76.8 mm75 parts2LNo license0
Power Supply and Charge Circuit
40.1 × 25 mm38 parts4LNo license0
Power Bus Board
31 × 41 mm20 parts2LNo license0
PWM Heater Control FULL with boost conv remake
48.9 × 47.1 mm20 parts2LNo license0
PWM to V PSU
75.2 × 45.7 mm18 parts2LNo license0
GIC Complete Circuit
31.8 × 29.2 mm14 parts2LNo license0
Debouncer
23.6 × 20 mm11 parts2LNo license0
5 Piece Gas Sensor Mounting Board with TempHum sens
52.2 × 43.2 mm10 parts2LNo license0
Heater Driver Simple
32.8 × 15 mm9 parts2LNo license0
Similar boards
Sensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2k
Sensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8k
Microphone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2k
TemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1k
Pots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956
ButtonsLEDs
390 × 37 mm82 parts2LApache-2.0956