HardLabs

GIC Array[5] complete not optimised

owenpmorgan·STM_Based_Electronic_Nose_Platform·KiKad Projects/GIC_Array[5]/GIC_Array[5]_complete_not_optimised.kicad_pcb

GIC Array[5] complete not optimised PCB layout, top view — open source board by owenpmorgan

About the GIC Array[5] complete not optimised PCB

GIC Array[5] complete not optimised is an open source PCB design by owenpmorgan, published on GitHub. It is a 2-layer board measuring 104.8 × 76.8 mm, with 75 components from 12 distinct parts.

Other key parts include the NE555P and TLV2371DBV. By type, the board carries 30 resistors, 26 capacitors and 18 ICs.

It belongs with the rf & radio designs in this gallery.

From the project

The motivation for this project is to create an electronic nose system using a low cost device. Essentially this means using an MCU rather than a small board computer (SBC) like MyRio or Raspberry Pi.

The motivation for this project is to create an electronic nose system using a low cost device. Essentially this means using an MCU rather than a small board computer (SBC) like MyRio or Raspberry Pi.

The benefits of using an SBC are that inference (that is, running the model on a new input to classify it) can stay in the realm in which models are built and a single script or two can take care of the whole model for both training and inference, via tools such as Matlab, Octave, LabView, TensorFlow etc.

Main components on the GIC Array[5] complete not optimised

NE555PTLV2371DBV

GIC Array[5] complete not optimised bill of materials (BOM)

75 components, 12 distinct parts.

QtyPartRefs
6
NE555P
U1, U4, U7, U10, U13, U16
12
TLV2371DBV
U2, U3, U5, U6, U8, U9, U11, U12 +4
1
5V
+5V
1
10n
C1
1
100u
C2
6
C
C3, C7, C11, C15, C19, C23
12
100n
C4, C6, C8, C10, C12, C14, C16, C18 +4
6
10n
C5, C9, C13, C17, C21, C25
12
33k
R1, R2, R6, R7, R11, R12, R16, R17 +4
6
97k
R3, R8, R13, R18, R23, R28
6
330
R4, R9, R14, R19, R24, R29
6
1650
R5, R10, R15, R20, R25, R30

GIC Array[5] complete not optimised design files

The KiCad project lives in the owenpmorgan/STM_Based_Electronic_Nose_Platform repository on GitHub; these links point at the commit this page was built from.

GIC Array[5] complete not optimised: common questions

How big is the GIC Array[5] complete not optimised PCB?

The GIC Array[5] complete not optimised measures 104.8 × 76.8 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the GIC Array[5] complete not optimised?

75 components, from 12 distinct parts. The full bill of materials is listed on this page.

Where can I download the GIC Array[5] complete not optimised design files?

From the owenpmorgan/STM_Based_Electronic_Nose_Platform repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the GIC Array[5] complete not optimised design in my own project?

The repository has no license, so all rights stay with owenpmorgan. Use it as a reference, and ask the author before reusing the design.

More boards in STM_Based_Electronic_Nose_Platform

Similar boards