HardLabs

5 Piece Gas Sensor Mounting Board with TempHum sens

owenpmorgan·STM_Based_Electronic_Nose_Platform·KiKad Projects/5 Piece Gas Sensor Mounting Board with TempHum sens/5 Piece Gas Sensor Mounting Board with TempHum sens.kicad_pcb

5 Piece Gas Sensor Mounting Board with TempHum sens layout, top view — open source board by owenpmorgan

About the 5 Piece Gas Sensor Mounting Board with TempHum sens

5 Piece Gas Sensor Mounting Board with TempHum sens is an open source PCB design by owenpmorgan, published on GitHub. It is a 2-layer board measuring 52.2 × 43.2 mm, with 10 components from 10 distinct parts.

Other key parts include the TGS2600, TGS2602, TGS2611 E00, TGS2612 D00 and TGS2620. By type, the board carries 5 ICs and 4 connectors.

It belongs with the rf & radio and sensors designs in this gallery.

From the project

The motivation for this project is to create an electronic nose system using a low cost device. Essentially this means using an MCU rather than a small board computer (SBC) like MyRio or Raspberry Pi.

The motivation for this project is to create an electronic nose system using a low cost device. Essentially this means using an MCU rather than a small board computer (SBC) like MyRio or Raspberry Pi.

The benefits of using an SBC are that inference (that is, running the model on a new input to classify it) can stay in the realm in which models are built and a single script or two can take care of the whole model for both training and inference, via tools such as Matlab, Octave, LabView, TensorFlow etc.

Main components on the 5 Piece Gas Sensor Mounting Board with TempHum sens

TGS2600TGS2602TGS2611 E00TGS2612 D00TGS2620

5 Piece Gas Sensor Mounting Board with TempHum sens bill of materials (BOM)

10 components, 10 distinct parts.

QtyPartRefs
1
TGS2600
U1
1
TGS2602
U2
1
TGS2611 E00
U3
1
TGS2612 D00
U4
1
TGS2620
U5
1
Heater +
J7
1
Heater -
J8
1
Conn_01x04_Socket
J13
1
Conn_01x10_Socket
J14
1
~
HYT1

5 Piece Gas Sensor Mounting Board with TempHum sens design files

The KiCad project lives in the owenpmorgan/STM_Based_Electronic_Nose_Platform repository on GitHub; these links point at the commit this page was built from.

5 Piece Gas Sensor Mounting Board with TempHum sens: common questions

How big is the 5 Piece Gas Sensor Mounting Board with TempHum sens?

The 5 Piece Gas Sensor Mounting Board with TempHum sens measures 52.2 × 43.2 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the 5 Piece Gas Sensor Mounting Board with TempHum sens?

10 components, from 10 distinct parts. The full bill of materials is listed on this page.

Where can I download the 5 Piece Gas Sensor Mounting Board with TempHum sens design files?

From the owenpmorgan/STM_Based_Electronic_Nose_Platform repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the 5 Piece Gas Sensor Mounting Board with TempHum sens design in my own project?

The repository has no license, so all rights stay with owenpmorgan. Use it as a reference, and ask the author before reusing the design.

More boards in STM_Based_Electronic_Nose_Platform

Similar boards