PWM Heater Control FULL with boost conv remake
About the PWM Heater Control FULL with boost conv remake PCB
PWM Heater Control FULL with boost conv remake is an open source PCB design by owenpmorgan, published on GitHub. It is a 2-layer board measuring 48.9 × 47.1 mm, with 20 components from 17 distinct parts.
Other key parts include the MT3608 and OP177. By type, the board carries 5 connectors, 5 capacitors, 4 resistors, 2 ICs, 1 transistor and 1 diode.
It belongs with the rf & radio designs in this gallery.
From the project
The motivation for this project is to create an electronic nose system using a low cost device. Essentially this means using an MCU rather than a small board computer (SBC) like MyRio or Raspberry Pi.
The motivation for this project is to create an electronic nose system using a low cost device. Essentially this means using an MCU rather than a small board computer (SBC) like MyRio or Raspberry Pi.
The benefits of using an SBC are that inference (that is, running the model on a new input to classify it) can stay in the realm in which models are built and a single script or two can take care of the whole model for both training and inference, via tools such as Matlab, Octave, LabView, TensorFlow etc.
Main components on the PWM Heater Control FULL with boost conv remake
PWM Heater Control FULL with boost conv remake bill of materials (BOM)
20 components, 17 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MT3608 | SOT-23-6 | U1 |
| 1 | OP177 | DIP-8_W7.62mm | U2 |
| 1 | TIP41 | TO-220-3_Vertical | Q1 |
| 1 | Vin+ | PinHeader_1x01_P2.54mm_Vertical | J1 |
| 1 | PWM | PinHeader_1x01_P2.54mm_Vertical | J2 |
| 1 | Vin- | PinHeader_1x01_P2.54mm_Vertical | J3 |
| 1 | V Out + | PinHeader_1x01_P2.54mm_Vertical | J4 |
| 1 | V Out - | PinHeader_1x01_P2.54mm_Vertical | J5 |
| 1 | R_Potentiometer_Trim | Potentiometer_Bourns_3386P_Vertical | RV1 |
| 1 | SS34 | D_SMA | D1 |
| 1 | 22u | L_Bourns_SRP1038C_10.0x10.0mm | L1 |
| 2 | 22u | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1, C2 |
| 1 | 2.2u | CP_Radial_D8.0mm_P3.80mm | C3 |
| 1 | 1u | CP_Radial_D8.0mm_P3.80mm | C4 |
| 1 | 1000u | CP_Radial_D14.0mm_P7.50mm | C5 |
| 3 | 10k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R3, R4 |
| 1 | 2200 | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2 |
PWM Heater Control FULL with boost conv remake design files
The KiCad project lives in the owenpmorgan/STM_Based_Electronic_Nose_Platform repository on GitHub; these links point at the commit this page was built from.
PWM Heater Control FULL with boost conv remake: common questions
How big is the PWM Heater Control FULL with boost conv remake PCB?
The PWM Heater Control FULL with boost conv remake measures 48.9 × 47.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the PWM Heater Control FULL with boost conv remake?
20 components, from 17 distinct parts. The full bill of materials is listed on this page.
Where can I download the PWM Heater Control FULL with boost conv remake design files?
From the owenpmorgan/STM_Based_Electronic_Nose_Platform repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the PWM Heater Control FULL with boost conv remake design in my own project?
The repository has no license, so all rights stay with owenpmorgan. Use it as a reference, and ask the author before reusing the design.
More boards in STM_Based_Electronic_Nose_Platform
![Top view of GIC Array[5]](https://hip.fly.dev/v1/gallery/thumb/owenpmorgan--stm-based-electronic-nose-platform--gic-array-5.svg)
GIC Array[5]
104.8 × 66.6 mm75 parts2LNo license0![Top view of GIC Array[5] complete not optimised](https://hip.fly.dev/v1/gallery/thumb/owenpmorgan--stm-based-electronic-nose-platform--gic-array-5-complete-not-optimised.svg)
GIC Array[5] complete not optimised
104.8 × 76.8 mm75 parts2LNo license0
Power Supply and Charge Circuit
40.1 × 25 mm38 parts4LNo license0
Power Bus Board
31 × 41 mm20 parts2LNo license0
PWM to V PSU
75.2 × 45.7 mm18 parts2LNo license0
5 Piece Gas Sensor Mounting Board
50.5 × 49.5 mm17 parts2LNo license0
GIC Complete Circuit
31.8 × 29.2 mm14 parts2LNo license0
Debouncer
23.6 × 20 mm11 parts2LNo license0
5 Piece Gas Sensor Mounting Board with TempHum sens
52.2 × 43.2 mm10 parts2LNo license0
Heater Driver Simple
32.8 × 15 mm9 parts2LNo license0
Similar boards
Hat
pa3gsb
65 × 56 mm81 parts2LNo license675
Radioberry juice
65 × 56 mm87 parts2LNo license675
Radioberry preamp
65 × 56 mm137 parts2LNo license675
Hermes-Lite Small IO Expansion
softerhardware
18.4 × 12.5 mm6 parts2LNo license372
Hermes-Lite Jumper With IO
21.9 × 51.7 mm12 parts2LNo license372
Hermes-Lite PureSignal Feedback
17.1 × 15.4 mm6 parts2LNo license372