GIC Complete Circuit
About the GIC Complete Circuit PCB
GIC Complete Circuit is an open source PCB design by owenpmorgan, published on GitHub. It is a 2-layer board measuring 31.8 × 29.2 mm, with 14 components from 5 distinct parts.
Other key parts include the TLV2371DBV and NE555P. By type, the board carries 5 connectors, 5 resistors, 3 ICs and 1 capacitor.
It belongs with the rf & radio designs in this gallery.
From the project
The motivation for this project is to create an electronic nose system using a low cost device. Essentially this means using an MCU rather than a small board computer (SBC) like MyRio or Raspberry Pi.
The motivation for this project is to create an electronic nose system using a low cost device. Essentially this means using an MCU rather than a small board computer (SBC) like MyRio or Raspberry Pi.
The benefits of using an SBC are that inference (that is, running the model on a new input to classify it) can stay in the realm in which models are built and a single script or two can take care of the whole model for both training and inference, via tools such as Matlab, Octave, LabView, TensorFlow etc.
Main components on the GIC Complete Circuit
GIC Complete Circuit bill of materials (BOM)
14 components, 5 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | TLV2371DBV | SOT-23-5 | U1, U2 |
| 1 | NE555P | DIP-8_W7.62mm | U3 |
| 5 | Conn_01x01_Socket | Pin_D1.4mm_L8.5mm_W2.8mm_FlatFork | J1, J2, J3, J4, J5 |
| 1 | C | C_Disc_D6.0mm_W2.5mm_P5.00mm | C1 |
| 5 | R | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2, R3, R4, R5, R6 |
GIC Complete Circuit design files
The KiCad project lives in the owenpmorgan/STM_Based_Electronic_Nose_Platform repository on GitHub; these links point at the commit this page was built from.
GIC Complete Circuit: common questions
How big is the GIC Complete Circuit PCB?
The GIC Complete Circuit measures 31.8 × 29.2 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the GIC Complete Circuit?
14 components, from 5 distinct parts. The full bill of materials is listed on this page.
Where can I download the GIC Complete Circuit design files?
From the owenpmorgan/STM_Based_Electronic_Nose_Platform repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the GIC Complete Circuit design in my own project?
The repository has no license, so all rights stay with owenpmorgan. Use it as a reference, and ask the author before reusing the design.
More boards in STM_Based_Electronic_Nose_Platform
![Top view of GIC Array[5]](https://hip.fly.dev/v1/gallery/thumb/owenpmorgan--stm-based-electronic-nose-platform--gic-array-5.svg)
GIC Array[5]
104.8 × 66.6 mm75 parts2LNo license0![Top view of GIC Array[5] complete not optimised](https://hip.fly.dev/v1/gallery/thumb/owenpmorgan--stm-based-electronic-nose-platform--gic-array-5-complete-not-optimised.svg)
GIC Array[5] complete not optimised
104.8 × 76.8 mm75 parts2LNo license0
Power Supply and Charge Circuit
40.1 × 25 mm38 parts4LNo license0
Power Bus Board
31 × 41 mm20 parts2LNo license0
PWM Heater Control FULL with boost conv remake
48.9 × 47.1 mm20 parts2LNo license0
PWM to V PSU
75.2 × 45.7 mm18 parts2LNo license0
5 Piece Gas Sensor Mounting Board
50.5 × 49.5 mm17 parts2LNo license0
Debouncer
23.6 × 20 mm11 parts2LNo license0
5 Piece Gas Sensor Mounting Board with TempHum sens
52.2 × 43.2 mm10 parts2LNo license0
Heater Driver Simple
32.8 × 15 mm9 parts2LNo license0
Similar boards
Hat
pa3gsb
65 × 56 mm81 parts2LNo license675
Radioberry juice
65 × 56 mm87 parts2LNo license675
Radioberry preamp
65 × 56 mm137 parts2LNo license675
Hermes-Lite Small IO Expansion
softerhardware
18.4 × 12.5 mm6 parts2LNo license372
Hermes-Lite Jumper With IO
21.9 × 51.7 mm12 parts2LNo license372
Hermes-Lite PureSignal Feedback
17.1 × 15.4 mm6 parts2LNo license372