12 open source boards using the SI7021
Real designs built with the SI7021, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Signpost
lab11
68.1 × 66 mm61 parts4LApache-2.097PanStamp flexible battery board
panStamp
2 × 5 mm80 partsGPL-2.015AVR/Arduino
BOX-2252
fallberg
50.5 × 70 mm60 parts2LCERN-OHL-1.27Microchip SAM
SensebenderMicro2
tbowmo
21.5 × 32 mm40 parts2LNo license2STM32
TemperatureHumidityEPD
kevinkessler
48 × 33 mm22 parts2LGPL-3.02AVR/Arduino
LE-BOX-0028
fallberg
76 × 96 mm60 parts2LCERN-OHL-1.27ESP8266
PanStamp touch panel board
panStamp
113 × 180 mm62 partsGPL-2.015AVR/Arduino
MySensorsNode
fallberg
50 × 50 mm58 parts2LCERN-OHL-1.27PanStamp CO2 battery board
panStamp
75 × 95 mm34 partsGPL-2.015Cb minibat chipant
panStamp
25.4 × 56.6 mm29 partsGPL-2.015Minibat carrier board for panStamp
panStamp
25.4 × 55.8 mm29 partsGPL-2.015Battery board for panStamp
panStamp
50.1 × 70.1 mm27 partsGPL-2.015
How designs wire the SI7021
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the SI7021 connects to, and the resistors, capacitors and other passives placed on it.
- Pin 1 has a pull-up to 3.3V on 5 of 5 designs, most often 10 kΩ (then 4.7 kΩ).
- Pin 5 has a decoupling capacitor on 5 of 5 designs, most often 100 nF.
- Pin 6 has a pull-up to 3.3V on 5 of 5 designs, most often 10 kΩ (then 4.7 kΩ).
- Pin 2 is tied to GND on 5 of 5 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| Pin 1 | Connected to: A connector 60%, the microcontroller 60% |
|
| Pin 2 | Connected to: GND 100% | — |
| Pin 3 | Connected to: Not connected 100% | — |
| Pin 4 | Connected to: Not connected 100% | — |
| Pin 5 | Connected to: 3.3V 100% |
|
| Pin 6 | Connected to: A connector 60%, the microcontroller 60% |
|
| Pin 7 | Connected to: Not connected 100% | — |
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Signpost by lab11, Battery board for panStamp by panStamp, MySensorsNode by fallberg and TemperatureHumidityEPD-PCB by kevinkessler.
The SI7021 in open source designs
The gallery holds 12 open source boards using the SI7021 from 5 GitHub repositories; a typical one measures about 50.1 × 61.3 mm and carries around 49 components.
83% are two-layer designs, the rest use four layers or more, and 92% carry an open source license.
The most starred is Signpost by lab11.
Parts used alongside the SI7021
Microcontrollers on boards using the SI7021
What boards using the SI7021 are built for
SI7021: common questions
Where can I find a SI7021 reference design?
Each of the 12 boards on this page is a real design using the SI7021. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What pull-up resistor is used on the SI7021 pin 1?
Pin 1 has a pull-up to 3.3V on 5 of 5 designs, most often 10 kΩ (then 4.7 kΩ). Counted from the KiCad layouts of 5 open source designs using the SI7021.
What decoupling capacitors do designs use on the SI7021 pin 5?
Pin 5 has a decoupling capacitor on 5 of 5 designs, most often 100 nF. Counted from the KiCad layouts of 5 open source designs using the SI7021.
What pull-up resistor is used on the SI7021 pin 6?
Pin 6 has a pull-up to 3.3V on 5 of 5 designs, most often 10 kΩ (then 4.7 kΩ). Counted from the KiCad layouts of 5 open source designs using the SI7021.
What parts are used alongside the SI7021?
The ATSHA204A, NRF24L01, RFM69HW and TSL2561 appear in the most repositories here.
Which microcontrollers do boards using the SI7021 use?
Most are built on AVR/Arduino (3), ESP8266 (1), Microchip SAM (1) and STM32 (1).
How big is a typical board using the SI7021?
The median is 50.1 × 61.3 mm, and 83% are two-layer designs.
What is the most popular open source board using the SI7021?
By GitHub stars, Signpost by lab11, with 97 stars.
Can I simulate one of these boards using the SI7021 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.