VibePCB-bench psu

PaulBichl·VibePCB-bench-psu·boards/bench-psu/hardware/kicad/bench-psu.kicad_pcb

VibePCB-bench psu PCB layout, top view — open source ESP32 board by PaulBichl

About the VibePCB-bench psu PCB

VibePCB-bench psu is an open source ESP32 PCB design by PaulBichl, published on GitHub. It is a 4-layer board measuring 90 × 76 mm, with 87 components from 31 distinct parts.

Its main chip is the ESP32-S3-MINI-1-N8, from the ESP32 family. Other key parts include the STUSB4500QTR, USBLC6-2SC6, LMR51635YDDCR, AP2112K-3.3TRG1 and INA219AIDCNR. By type, the board carries 40 capacitors, 27 resistors, 9 ICs, 4 connectors, 3 inductors and 2 switches.

It belongs with the iot & wireless and power & battery designs in this gallery.

From the project

USB-C PD (20 V) powered bench supply, 2 independent channels, 1.6-16 V / 3 A each, designed with VibePCB. Board: boards/bench-psu (90 x 76 mm, 4 layers). Design rationale is also in the header of boards/bench-psu/index.circuit.tsx.

USB-C PD (20 V) powered bench supply, 2 independent channels, 1.6-16 V / 3 A each, designed with VibePCB. Board: boards/bench-psu (90 x 76 mm, 4 layers). Design rationale is also in the header of boards/bench-psu/index.circuit.tsx.

- Plain buck, not buck-boost: the PD input (20 V) is always above the output (max 16 V). The only I2C-programmable buck-boost considered (TPS55288) is not in JLCPCB's catalogue. - Voltage setting: per channel a 14-bit ESP32 PWM, RC filtered (2 x 10k/1uF), injects current into the LMR51635 feedback node: Vout = 0.8 V (1 + 100k/6k) - 5 (Vpwm - 0.8 V), i.e. 18.1 V at…

VibePCB-bench psu, from the project README
From the project README

Main components on the VibePCB-bench psu

VibePCB-bench psu bill of materials (BOM)

87 components, 31 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
STUSB4500QTR
U1
1
USBLC6-2SC6
U2
3
LMR51635YDDCR
U3, U11, U21
1
AP2112K-3.3TRG1
U4
1
ESP32-S3-MINI-1-N8
U5
2
INA219AIDCNR
U12, U22
1
AO4407A
Q1
1
TYPE-C 16PIN 2MD(073)
J1
1
DG301-5.0-04P-14-1000A(H)
J2
1
PZ254V-11-04P
J3
1
PZ254V-11-05P
J4
2
TS-1187A-B-A-B
SW1, SW2
1
SMBJ24A
D1
3
SWPA6045S100MT
10µH
L1, L11, L21
9
1UF
1uF
C1, C2, C3, C14, C18, C110, C111, C210 +1
7
100NF
100nF
C4, C11, C17, C104, C108, C204, C208
1
4.7NF
4.7nF
C5
3
NXA63V100M8*15 LO
100uF
C6, C109, C209
7
2.2UF
2.2uF
C7, C8, C9, C101, C102, C201, C202
3
100NF
100nF
C10, C103, C203
Show 11 more
QtyPartRefs
2
22UF
22uF
C12, C13
2
10UF
10uF
C15, C16
6
4.7UF
4.7uF
C105, C106, C107, C205, C206, C207
1
1kΩ
R1
1
1MΩ
R2
7
100kΩ
R3, R4, R5, R102, R108, R202, R208
3
20kΩ
R6, R105, R205
7
10kΩ
R9, R10, R13, R106, R107, R206, R207
2
4.7kΩ
R11, R12
2
100mΩ
R101, R201
4
12kΩ
R103, R104, R203, R204

VibePCB-bench psu design files

The KiCad project lives in the PaulBichl/VibePCB-bench-psu repository on GitHub; these links point at the commit this page was built from.

VibePCB-bench psu: common questions

What microcontroller does the VibePCB-bench psu use?

The VibePCB-bench psu is built around the ESP32-S3-MINI-1-N8, from the ESP32 family.

How big is the VibePCB-bench psu PCB?

The VibePCB-bench psu measures 90 × 76 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the VibePCB-bench psu?

87 components, from 31 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the VibePCB-bench psu design files?

From the PaulBichl/VibePCB-bench-psu repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the VibePCB-bench psu design in my own project?

The repository has no license, so all rights stay with PaulBichl. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the VibePCB-bench psu without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards