PinJammerV01
pinqin·PinJammerV01·1001016-001-10-01_PinJammer_V01/1001016-001-10-01_PinJammer_V01.kicad_pcb
About the PinJammerV01 PCB
PinJammerV01 is an open source ESP32 PCB design by pinqin, published on GitHub. It is a 2-layer board measuring 66 × 133.4 mm, with 63 components from 36 distinct parts.
Its main chip is the ESP32_DEVKIT_V1_DOIT_30GPIOS, from the ESP32 family. Other key parts include the TLV62568DBVR, BQ25180YBGR, E01-ML01DP5, DX07S016JA1R1500 and HS96L03W2C03. By type, the board carries 19 resistors, 11 capacitors, 8 connectors, 7 ICs, 6 switches and 3 LEDs.
It belongs with the power & battery and displays & leds designs in this gallery.
From the project
This file documents the hardware of PCB 1001016-001-10-01PinJammerV01, including a consolidated bill of materials.
This file documents the hardware of PCB 1001016-001-10-01PinJammerV01, including a consolidated bill of materials.
- MCU: ESP32 DevKit V1 (30 Pins) - Radio modules: 3x NRF24L01+ (E01-ML01DP5) - Display: 0.96" OLED (HS96L03W2C03) - Charger IC: BQ25180YBGR - Buck regulator: TLV62568DBV - USB-C connector: DX07S016JA1R1500 - User inputs: 5x push buttons (SKRKAEE020), 1x slide switch (SPDT) - Battery: LiPo connector / holder for 18650-compatible supply

Main components on the PinJammerV01
PinJammerV01 bill of materials (BOM)
63 components, 36 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TLV62568DBVR TLV62568DBV | SOT-23-5 | U1 |
| 1 | BQ25180YBGR | IC_BQ25180YBGR | U2 |
| 3 | E01-ML01DP5 | WIRELM-TH_E01-ML01DP5 | U3, U4, U5 |
| 1 | DX07S016JA1R1500 DX07S016JA1R1500_C3197885 | USB-C-SMD_DX07S016JA1R1500 | U6 |
| 1 | HS96L03W2C03 | OLED-TH_L27.8-W27.2-P2.54_C9900033791 | U7 |
| 1 | ESP32_DEVKIT_V1_DOIT_30GPIOS ESP32_DevKit_V1_DOIT_30GPIOs | DOIT_ESP32_DEVKIT_30Pins | A1 |
| 1 | NTJD1155LT1G | SOT65P210X110-6N | Q1 |
| 1 | BC847 | SOT-23 | Q2 |
| 6 | HX PH254-01-02-Z-L11.5 Conn_01x02_Pin | PinHeader_1x02_P2.54mm_Vertical | J1, J2, J3, J4, J5, J6 |
| 1 | HB-PH3-25417PB2GOP Conn_01x07 | PinHeader_1x07_P2.54mm_Vertical | J7 |
| 1 | HX PH254-01-04-Z-L11.5 Conn_01x04_Pin | PinHeader_1x04_P2.54mm_Vertical | J8 |
| 1 | 1042 | BAT-SMD_1042P | BAT1 |
| 1 | LIPO_18650 Lipo_18650 | Lipo_18650 | BT1 |
| 1 | CMT-8540S-SMT-TR Buzzer | CMT-8540S-SMT-TR | BZ1 |
| 5 | SKRKAEE020 | SKRKAEE020 | S1, S2, S3, S4, S5 |
| 1 | OS102011MA1QS1 SW_SPDT | SW_Slide_SPDT_Angled_CK_OS102011MA1Q | SW2 |
| 1 | NTCLE100E3104JB0 100K | Vishay_BC_Components-NTCLE100E3104JB0-MFG | TH1 |
| 3 | HSMG-C170 | LEDC2012X80N | LED1, LED2, LED3 |
| 1 | 1N4148W | D_SOD-123 | D1 |
| 1 | WIP252010P-2R2ML 2µ2 | L_1008_2520Metric | L1 |
Show 16 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | GRM21BR71A475KA73L 4.7µF | C_0805_2012Metric | C1 |
| 3 | GRM188R61A106KE69D 10µF | C_0603_1608Metric | C2, C8, C20 |
| 1 | GRM155Z71A105KE01D 1µF | C_0402_1005Metric | C3 |
| 1 | GRM21BR71A106KE51L 10µF | C_0805_2012Metric | C4 |
| 1 | GRM155R61A106ME44D 10µF | C_0402_1005Metric | C5 |
| 1 | CL10A105KA8NNNC 1µF | C_0603_1608Metric | C6 |
| 1 | CC0402CRNPO9BN6R8 6.8pF | C_0603_1608Metric | C7 |
| 2 | CC0603KRX7R9BB104 100nF | C_0603_1608Metric | C9, C21 |
| 1 | RC0603JR-070RL 0R | R_0603_1608Metric | R1 |
| 3 | RC0603FR-07100KL 100K 1% | R_0603_1608Metric | R2, R5, R7 |
| 1 | RC0603FR-0775KL 75K 1% | R_0603_1608Metric | R3 |
| 1 | FRC0402F4503TS 450K | R_0402_1005Metric | R4 |
| 5 | RC0603FR-0710KL 10K | R_0603_1608Metric | R6, R14, R15, R16, R20 |
| 3 | RC0603FR-072K2L 2K2 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R8, R9, R10 |
| 3 | RC0603FR-07100RL 100R | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R11, R12, R13 |
| 2 | RC0603FR-075K1L 5K1 | R_0603_1608Metric | R48, R49 |
PinJammerV01 design files
The KiCad project lives in the pinqin/PinJammerV01 repository on GitHub; these links point at the commit this page was built from.
PinJammerV01: common questions
What microcontroller does the PinJammerV01 use?
The PinJammerV01 is built around the ESP32_DEVKIT_V1_DOIT_30GPIOS, from the ESP32 family.
How big is the PinJammerV01 PCB?
The PinJammerV01 measures 66 × 133.4 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the PinJammerV01?
63 components, from 36 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the PinJammerV01 design files?
From the pinqin/PinJammerV01 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the PinJammerV01 design in my own project?
The repository has no license, so all rights stay with pinqin. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the PinJammerV01 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k