Mspmo baord
prashantbhandary·mspmo-baord
About the Mspmo baord PCB
Mspmo baord is an open source PCB design by prashantbhandary, published on GitHub. It is a 2-layer board measuring 53 × 28 mm, with 29 components from 13 distinct parts.
Other key parts include the SPX3819M5-L-3-3, MSPM0G3507SPTR, CH340E and LIS2DH. By type, the board carries 14 capacitors, 8 resistors, 4 ICs, 1 crystal, 1 connector and 1 diode.
It belongs with the sensors and usb & debug tools designs in this gallery.
From the project
A compact USB-C development board for TI's MSPM0G3507 (Arm Cortex-M0+, 80 MHz, 128 KB flash, 32 KB SRAM), with an on-board USB-to-UART bridge, a 3-axis accelerometer and a Tag-Connect SWD footprint.
A compact USB-C development board for TI's MSPM0G3507 (Arm Cortex-M0+, 80 MHz, 128 KB flash, 32 KB SRAM), with an on-board USB-to-UART bridge, a 3-axis accelerometer and a Tag-Connect SWD footprint.
Upload mfr.zip to the board house. For assembly, use fab/mspmo-baord.csv (BOM) and fab/posfile/mspmo-baord-all-pos.csv (CPL).
KiCad 10. Renders made with kicad-cli pcb render.

Main components on the Mspmo baord
Mspmo baord bill of materials (BOM)
29 components, 13 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | SPX3819M5-L-3-3 | SOT-23-5 | U1 |
| 1 | MSPM0G3507SPTR | LQFP-48_7x7mm_P0.5mm | U3 |
| 1 | CH340E | MSOP-10_3x3mm_P0.5mm | U4 |
| 1 | LIS2DH | LGA-14_2x2mm_P0.35mm_LayoutBorder3x4y | U5 |
| 1 | 8MHz | Crystal_SMD_3225-4Pin_3.2x2.5mm | X1 |
| 1 | USB_C_Receptacle_USB2.0_16P | USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J1 |
| 1 | USBLC6-2SC6 | SOT-23-6 | D1 |
| 3 | 10u | C_0805_2012Metric | C1, C2, C8 |
| 9 | 470n | C_0603_1608Metric | C3, C4, C5, C6, C7, C9, C10, C13 +1 |
| 2 | 15p | C_0603_1608Metric | C11, C12 |
| 2 | 0R | R_0603_1608Metric | R1, R8 |
| 5 | 5K1 | R_0603_1608Metric | R2, R3, R4, R5, R7 |
| 1 | 100K | R_0603_1608Metric | R6 |
Mspmo baord design files
The KiCad project lives in the prashantbhandary/mspmo-baord repository on GitHub; these links point at the commit this page was built from.
- Layoutmspmo-baord.kicad_pcb
- Schematicmspmo-baord.kicad_sch
Mspmo baord: common questions
How big is the Mspmo baord PCB?
The Mspmo baord measures 53 × 28 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Mspmo baord?
29 components, from 13 distinct parts. The full bill of materials is listed on this page.
Where can I download the Mspmo baord design files?
From the prashantbhandary/mspmo-baord repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Mspmo baord design in my own project?
The repository has no license, so all rights stay with prashantbhandary. Use it as a reference, and ask the author before reusing the design.
Similar boards
Sensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2kSensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8kMicrophone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kPots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956USB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956