HardLabs

Rasp IO board with-NVME

PrinceYadav78·Rasp_IO_board-with-NVME·PCB/Rasp_IO_board.kicad_pcb

Rasp IO board with-NVME layout, top view — open source Raspberry Pi board by PrinceYadav78

About the Rasp IO board with-NVME

Rasp IO board with-NVME is an open source Raspberry Pi PCB design by PrinceYadav78, published on GitHub under the MIT license. It is a 4-layer board measuring 160 × 90 mm, with 63 components from 34 distinct parts.

Its main chip is the ComputeModule5-CM5, from the Raspberry Pi family. Other key parts include the TPD4EUSB30, MAGJACK-A70-112-331N126, AP22653W6, ASEK-32.768KHZ-L-R-T and AP3441SHE-7B. By type, the board carries 19 capacitors, 16 resistors, 13 connectors, 8 ICs, 3 diodes and 1 battery holder.

From the project

Rasp_IO_board with NVME

Rasp IO board with-NVME, from the project README
From the project README

Main components on the Rasp IO board with-NVME

TPD4EUSB30MAGJACK-A70-112-331N126AP22653W6ASEK-32.768KHZ-L-R-TAP3441SHE-7BRT9742SNGVRT9742GGJ5

Rasp IO board with-NVME bill of materials (BOM)

63 components, 34 distinct parts — part numbers from the project's BOM.

QtyPartRefs
2
TPD4EUSB30
U1, U2
1
MAGJACK-A70-112-331N126
MagJack-A70-112-331N126
U3
1
AP22653W6
U6
1
ASEK-32.768KHZ-L-R-T
U7
1
AP3441SHE-7B
U8
1
RT9742SNGV
U12
1
RT9742GGJ5
U18
1
CONN_02X07_ODD_EVEN
Conn_02x07_Odd_Even
J2
1
BUS_M.2_SOCKET_M
Bus_M.2_Socket_M
J4
2
CONN_01X22_FEMALE
Conn_01x22_Female
J5, J16
2
THD-02-R
J6, J9
1
Micro_SD_Card_Det
J7
1
THD-20-R
J8
2
690-019-298-412
J10, J22
1
USB_C_RECEPTACLE_USB2.0
USB_C_Receptacle_USB2.0
J11
1
USB3_A
J12
1
JST_SHBM04B-SRSS-TB
J14
1
Battery_Cell
BT1
1
ComputeModule5-CM5
Module1
1
Right angle Tact button
SW1
Show 14 more
QtyPartRefs
1
LED Red
D1
2
LED Green
D2, D3
1
2.2UH
2.2uH
L1
7
100N
100n
C1, C9, C10, C12, C13, C18, C19
10
10U
10u
C2, C4, C5, C6, C7, C8, C14, C15 +2
1
100UF
100uF
C3
1
4.7NF
4.7nF
C11
3
1k
R1, R10, R17
2
470R
R2, R3
1
0R
R5
5
2.2K 1%
R6, R7, R8, R9, R16
3
10K 1%
R11, R13, R15
1
15K 1%
R12
1
100K 1%
R14

Rasp IO board with-NVME design files

The KiCad project lives in the PrinceYadav78/Rasp_IO_board-with-NVME repository on GitHub; these links point at the commit this page was built from.

Rasp IO board with-NVME: common questions

What microcontroller does the Rasp IO board with-NVME use?

The Rasp IO board with-NVME is built around the ComputeModule5-CM5, from the Raspberry Pi family.

How big is the Rasp IO board with-NVME?

The Rasp IO board with-NVME measures 160 × 90 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Rasp IO board with-NVME?

63 components, from 34 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Rasp IO board with-NVME design files?

From the PrinceYadav78/Rasp_IO_board-with-NVME repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Rasp IO board with-NVME design in my own project?

Yes, under the terms of its MIT license, which PrinceYadav78 chose for the repository.

Can I test firmware for the Rasp IO board with-NVME without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Raspberry Pi firmware against it before you order a PCB.

Similar boards