28 open source boards using the MagJack-A70-112-331N126

Real designs built with the MagJack-A70-112-331N126, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

28 boardsClear filters|Most starred

How designs wire the MagJack-A70-112-331N126

Read from the KiCad layouts of 23 open source designs, one per repository: what each pin of the MagJack-A70-112-331N126 connects to, and the resistors, capacitors and other passives placed on it.

  • The CT pins have a capacitor to GND on 23 of 23 designs, most often 100 nF.
  • The LEDY_K pin has a series resistor on 22 of 23 designs, most often 470 Ω.
  • The LEDG_K pin has a series resistor on 22 of 23 designs, most often 470 Ω.
  • The SHIELD pins is tied to GND on 100% of them.
CTpin 4, 5Connected to: Signal 100%
  • Capacitor to GND on 100% · 100 nF (46)
LEDY_Apin 15Connected to: 3.3V 96%
LEDY_Kpin 16Connected to: Signal 100%
  • Series resistor on 96% · 470 Ω (22)
LEDG_Apin 17Connected to: 3.3V 96%
LEDG_Kpin 18Connected to: Signal 100%
  • Series resistor on 96% · 470 Ω (22)
SHIELDpin 19, 20Connected to: GND 100%

12 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Libreboard by 256foundation, CM4IOv5-clone by sergiomd4, Unifying-PCB by balthazar-space and CM5IO by UofA-BAJA.

The MagJack-A70-112-331N126 in open source designs

The gallery holds 28 open source boards using the MagJack-A70-112-331N126 from 25 GitHub repositories; a typical one measures about 160 × 90 mm and carries around 106 components.

82% use four copper layers or more, and 39% carry an open source license.

The most starred is Libreboard by 256foundation.

Microcontrollers on boards using the MagJack-A70-112-331N126

MagJack-A70-112-331N126: common questions

Where can I find a MagJack-A70-112-331N126 reference design?

Each of the 28 boards on this page is a real design using the MagJack-A70-112-331N126. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the MagJack-A70-112-331N126 CT pin connected?

The CT pins have a capacitor to GND on 23 of 23 designs, most often 100 nF. Counted from the KiCad layouts of 23 open source designs using the MagJack-A70-112-331N126.

What resistor goes on the MagJack-A70-112-331N126 LEDY_K pin?

The LEDY_K pin has a series resistor on 22 of 23 designs, most often 470 Ω. Counted from the KiCad layouts of 23 open source designs using the MagJack-A70-112-331N126.

What resistor goes on the MagJack-A70-112-331N126 LEDG_K pin?

The LEDG_K pin has a series resistor on 22 of 23 designs, most often 470 Ω. Counted from the KiCad layouts of 23 open source designs using the MagJack-A70-112-331N126.

What parts are used alongside the MagJack-A70-112-331N126?

The TPD4EUSB30, RT9742SNGV, AP22653W6, RT9742GGJ5 and 74LVC1G07SE-7 appear in the most repositories here.

Which microcontrollers do boards using the MagJack-A70-112-331N126 use?

Most are built on Raspberry Pi (27) and STM32 (1).

How big is a typical board using the MagJack-A70-112-331N126?

The median is 160 × 90 mm, and 18% are two-layer designs.

What is the most popular open source board using the MagJack-A70-112-331N126?

By GitHub stars, Libreboard by 256foundation, with 21 stars.

Can I simulate one of these boards using the MagJack-A70-112-331N126 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part