22 open source boards using the AP3441SHE-7B

Real designs built with the AP3441SHE-7B, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

22 boardsClear filters|Most starred

How designs wire the AP3441SHE-7B

Read from the KiCad layouts of 21 open source designs, one per repository: what each pin of the AP3441SHE-7B connects to, and the resistors, capacitors and other passives placed on it.

  • The FB pin has a resistor to GND on 21 of 21 designs, most often 2.2 kΩ.
  • The LX pin has a inductor on 20 of 21 designs, most often 2.2 µH.
  • The FB pin has a series capacitor on 19 of 21 designs, most often 4.7 nF.
  • The FB pin has a series resistor on 19 of 21 designs, most often 10 kΩ.
FBpin 1Connected to: Signal 100%
  • Resistor to GND on 100% · 2.2 kΩ (21)
  • Series capacitor on 90% · 4.7 nF (19)
  • Series resistor on 90% · 10 kΩ (19)
PGpin 2Connected to: Not connected 100%
VINpin 3Connected to: 5V 90%
  • Decoupling capacitor on 90% · 10 µF (33), 100 nF (17), 22 µF (3)
PGNDpin 4Connected to: GND 100%
NCpin 5Connected to: Not connected 100%
LXpin 6Connected to: Signal 95%
  • Inductor on 95% · 2.2 µH (19)
ENpin 7Connected to: Signal 90%
  • Resistor to GND on 81% · 100 kΩ (17)
SGNDpin 8Connected to: GND 100%
PADpin 9Connected to: GND 100%

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include CM5 MINIMA by claynicholson, Libreboard by 256foundation, CM5IO by UofA-BAJA and Specter by zenos01.

The AP3441SHE-7B in open source designs

The gallery holds 22 open source boards using the AP3441SHE-7B from 21 GitHub repositories; a typical one measures about 160 × 90 mm and carries around 63 components.

95% use four copper layers or more, and 50% carry an open source license.

The most starred is CM5 MINIMA by claynicholson.

Microcontrollers on boards using the AP3441SHE-7B

AP3441SHE-7B: common questions

Where can I find a AP3441SHE-7B reference design?

Each of the 22 boards on this page is a real design using the AP3441SHE-7B. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What resistor goes on the AP3441SHE-7B FB pin?

The FB pin has a resistor to GND on 21 of 21 designs, most often 2.2 kΩ. Counted from the KiCad layouts of 21 open source designs using the AP3441SHE-7B.

How is the AP3441SHE-7B LX pin connected?

The LX pin has a inductor on 20 of 21 designs, most often 2.2 µH. Counted from the KiCad layouts of 21 open source designs using the AP3441SHE-7B.

What decoupling capacitors do designs use on the AP3441SHE-7B VIN pin?

The VIN pin has a decoupling capacitor on 19 of 21 designs, most often 10 µF (then 100 nF). Counted from the KiCad layouts of 21 open source designs using the AP3441SHE-7B.

What parts are used alongside the AP3441SHE-7B?

The ASEK-32.768KHZ-L-R-T, RT9742GGJ5, AP22653W6, RT9742SNGV and TPD4EUSB30 appear in the most repositories here.

Which microcontrollers do boards using the AP3441SHE-7B use?

Most are built on Raspberry Pi (19).

How big is a typical board using the AP3441SHE-7B?

The median is 160 × 90 mm, and 5% are two-layer designs.

What is the most popular open source board using the AP3441SHE-7B?

By GitHub stars, CM5 MINIMA by claynicholson, with 102 stars.

Can I simulate one of these boards using the AP3441SHE-7B before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part