QRET 23-24 SRAD Altimeter Module
Queens-Rocket-Engineering-Team·av-recovery·Schematics/Altimeter_Module/Altimeter_Module.kicad_pcb
About the QRET 23-24 SRAD Altimeter Module
QRET 23-24 SRAD Altimeter Module is an open source STM32 PCB design by Queens-Rocket-Engineering-Team, published on GitHub. It is a 4-layer board measuring 69.5 × 62.6 mm, with 92 components from 51 distinct parts.
Its main chip is the STM32F103CBT6, from the STM32 family. Other key parts include the QMA6100P, MS560702BA03-50, W25Q128JVS, LM66100DCKR and ISO1042BDWVR. By type, the board carries 30 capacitors, 29 resistors, 12 ICs, 8 diodes, 4 transistors and 4 connectors.
It belongs with the rf & radio designs in this gallery.
From the project
QRET Avionics GPS and Altimeter Modules
This directory contains all schematics involved in this iteration of the Avionics Recovery system.
Main components on the QRET 23-24 SRAD Altimeter Module
QRET 23-24 SRAD Altimeter Module bill of materials (BOM)
92 components, 51 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | QMA6100P | LGA-12_2x2mm_P0.5mm | U1 |
| 1 | MS560702BA03-50 | MS5607_Handsolder | U2 |
| 1 | W25Q128JVS | SOIC-8_5.23x5.23mm_P1.27mm | U3 |
| 3 | LM66100DCKR | SC-70-6_Handsoldering | U4, U5, U7 |
| 1 | STM32F103CBT6 | LQFP-48_7x7mm_P0.5mm | U6 |
| 1 | ISO1042BDWVR | SOIC-8 ISO1042BDWV | U8 |
| 1 | MPU-6050 | InvenSense_QFN-24_4x4mm_P0.5mm | U9 |
| 1 | TPM8837C-SO1R | SOP-8_TPK | U10 |
| 1 | CP2102N-Axx-xQFN28 | QFN-28-1EP_5x5mm_P0.5mm_EP3.35x3.35mm | U11 |
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U12 |
| 2 | AO3400A | SOT-23 | Q1, Q4 |
| 2 | AO4406A | SOIC-8_3.9x4.9mm_P1.27mm | Q2, Q5 |
| 1 | X322516MMB4SI | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | Main E-Match | CONN_2-1445057-2_TYCO | J2 |
| 1 | Drogue E-Match | CONN_2-1445057-2_TYCO | J3 |
| 1 | USB_C_Female_USB2_Small | USB_C_DB-108PWB | J4 |
| 1 | SWD_01x04_Pin | SWD_PinHeader_1x04_P2.54mm_Horizontal_SMD | J5 |
| 1 | PS1240P02BT | Buzzer_12.6x9.5RM5.0 | BZ1 |
| 1 | SW_STM_RESET | SW_Push_1P1T_XKB_TS-1187A | SW1 |
| 1 | SW_STM_BOOT_MODE | SW_Push_1P1T_XKB_TS-1187A | SW2 |
Show 31 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | PWR_LED (GRN) | LED_0805_2012Metric | D1 |
| 2 | WS2812B | LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D2, D4 |
| 1 | DB_LED (YLW) | LED_0603_1608Metric | D3 |
| 2 | 1N5819WS | D_SOD-323 | D5, D6 |
| 1 | FIRE_MAIN (RED) | LED_0603_1608Metric | D7 |
| 1 | FIRE_DRGE (RED) | LED_0603_1608Metric | D8 |
| 1 | 100R | R_0805_2012Metric | FB1 |
| 8 | 100nF | C_0603_1608Metric | C1, C3, C5, C8, C9, C18, C24, C30 |
| 4 | 1uF | C_0603_1608Metric | C2, C4, C6, C16 |
| 2 | 10p | C_0603_1608Metric | C7, C10 |
| 1 | 10uF | CP_Elec_4x5.4 | C11 |
| 4 | 100n | C_0402_1005Metric | C12, C13, C15, C17 |
| 1 | 100uF | CP_Elec_6.3x5.9 | C14 |
| 1 | 10n | C_0603_1608Metric | C19 |
| 2 | 1uF | C_0805_2012Metric | C20, C21 |
| 2 | 0.1u | C_0603_1608Metric | C22, C23 |
| 1 | 2.2nF | C_0603_1608Metric | C25 |
| 1 | 10nF | C_0603_1608Metric | C26 |
| 3 | 10uF | C_0603_1608Metric | C27, C31, C32 |
| 2 | 4.7k | R_0603_1608Metric | R1, R3 |
| 6 | 10k | R_0603_1608Metric | R2, R4, R6, R11, R19, R25 |
| 1 | 3.3k | R_0603_1608Metric | R5 |
| 1 | 680R | R_0603_1608Metric | R7 |
| 1 | 1.5k | R_0603_1608Metric | R8 |
| 6 | 510R | R_0603_1608Metric | R9, R18, R20, R24, R26, R27 |
| 1 | 30k | R_0603_1608Metric | R10 |
| 6 | 100k | R_0603_1608Metric | R12, R13, R17, R21, R22, R23 |
| 2 | 5.1k | R_0603_1608Metric | R28, R29 |
| 1 | 22k | R_0603_1608Metric | R30 |
| 1 | 47k | R_0603_1608Metric | R31 |
| 1 | 1k | R_0603_1608Metric | R32 |
QRET 23-24 SRAD Altimeter Module design files
The KiCad project lives in the Queens-Rocket-Engineering-Team/av-recovery repository on GitHub; these links point at the commit this page was built from.
QRET 23-24 SRAD Altimeter Module: common questions
What microcontroller does the QRET 23-24 SRAD Altimeter Module use?
The QRET 23-24 SRAD Altimeter Module is built around the STM32F103CBT6, from the STM32 family.
How big is the QRET 23-24 SRAD Altimeter Module?
The QRET 23-24 SRAD Altimeter Module measures 69.5 × 62.6 mm, has 4 copper layers and is 1.6062 mm thick.
How many components are on the QRET 23-24 SRAD Altimeter Module?
92 components, from 51 distinct parts. The full bill of materials is listed on this page.
Where can I download the QRET 23-24 SRAD Altimeter Module design files?
From the Queens-Rocket-Engineering-Team/av-recovery repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the QRET 23-24 SRAD Altimeter Module design in my own project?
The repository has no license, so all rights stay with Queens-Rocket-Engineering-Team. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the QRET 23-24 SRAD Altimeter Module without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in av-recovery
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k