12 open source boards using the MS560702BA03-50
Real designs built with the MS560702BA03-50, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350
Active drag system
RocketryVT
33 × 90 mm75 parts4LMIT6ESP32
Alcantara
zenitheesc
101.5 × 43.6 mm88 parts4LNo license5STM32
TeleSTERN
shorlee
90 × 45 mm293 parts6LGPL-3.03ESP32
PTR mega hardware
PTR-projects
31 × 100 mm203 parts4LMIT3STM32
QRET 23-24 SRAD Altimeter Module
Queens-Rocket-Engineering-Team
69.5 × 62.6 mm92 parts4LNo license1STM32
DAQ-V4.1
IlyaasAitSimmou
38 × 100 mm76 parts4LNo license1STM32
Croi
ULAS-HiPR
60 × 60 mm62 parts6LNo license1RP2040/RP2350
Active drag system minimal
RocketryVT
33 × 81.8 mm67 parts4LMIT6Sensor Stack
keeratrajsinghwork
70 × 70 mm27 parts2LNo license0STM32
QRET 23-24 SRAD Altimeter Module
Queens-Rocket-Engineering-Team
69.5 × 62.6 mm92 parts4LNo license3STM32
OBC-Attempt-1 Matcha 4 Layer
HelloItzAlex
44.5 × 57.2 mm65 parts4LNo license1STM32
QRET 23-24 SRAD Altimeter Module
Queens-Rocket-Engineering-Team
69.5 × 62.6 mm92 parts4LNo license1
How designs wire the MS560702BA03-50
Read from the KiCad layouts of 11 open source designs, one per repository: what each pin of the MS560702BA03-50 connects to, and the resistors, capacitors and other passives placed on it.
- The VDD pin has a decoupling capacitor on 10 of 11 designs, most often 100 nF (then 1 µF).
- The SDI/SDA pin has a pull-up to 3.3V on 6 of 11 designs, most often 4.7 kΩ (then 10 kΩ).
- The SCLK pin has a pull-up to 3.3V on 6 of 11 designs, most often 4.7 kΩ (then 10 kΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VDDpin 1 | Connected to: 3.3V 100% |
|
| GNDpin 3 | Connected to: GND 100% | — |
| SDI/SDApin 7 | Connected to: The microcontroller 82%, MPU-6050 27%, QMA6100P 27% |
|
| SCLKpin 8 | Connected to: The microcontroller 73%, MPU-6050 27%, QMA6100P 27% |
|
3 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Active drag system by RocketryVT, Alcantara by zenitheesc, PTR mega hardware by PTR-projects and QRET 23-24 SRAD Altimeter Module by Queens-Rocket-Engineering-Team.
The MS560702BA03-50 in open source designs
The gallery holds 12 open source boards using the MS560702BA03-50 from 11 GitHub repositories; a typical one measures about 64.8 × 62.6 mm and carries around 82 components.
92% use four copper layers or more, and 33% carry an open source license.
The most starred is Active drag system by RocketryVT.
Parts used alongside the MS560702BA03-50
Microcontrollers on boards using the MS560702BA03-50
What boards using the MS560702BA03-50 are built for
MS560702BA03-50: common questions
Where can I find a MS560702BA03-50 reference design?
Each of the 12 boards on this page is a real design using the MS560702BA03-50. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the MS560702BA03-50 VDD pin?
The VDD pin has a decoupling capacitor on 10 of 11 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 11 open source designs using the MS560702BA03-50.
What pull-up resistor is used on the MS560702BA03-50 SDI/SDA pin?
The SDI/SDA pin has a pull-up to 3.3V on 6 of 11 designs, most often 4.7 kΩ (then 10 kΩ). Counted from the KiCad layouts of 11 open source designs using the MS560702BA03-50.
What pull-up resistor is used on the MS560702BA03-50 SCLK pin?
The SCLK pin has a pull-up to 3.3V on 6 of 11 designs, most often 4.7 kΩ (then 10 kΩ). Counted from the KiCad layouts of 11 open source designs using the MS560702BA03-50.
What parts are used alongside the MS560702BA03-50?
The W25Q128JVS, ADXL375BCCZ, AMS1117-3.3, CP2102N-Axx-xQFN28 and ISO1042BDWVR appear in the most repositories here.
Which microcontrollers do boards using the MS560702BA03-50 use?
Most are built on STM32 (7), ESP32 (2) and RP2040/RP2350 (2).
How big is a typical board using the MS560702BA03-50?
The median is 64.8 × 62.6 mm, and 8% are two-layer designs.
What is the most popular open source board using the MS560702BA03-50?
By GitHub stars, Active drag system by RocketryVT, with 6 stars.
Can I simulate one of these boards using the MS560702BA03-50 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.