17 open source boards using the ISO1042BDWVR
Real designs built with the ISO1042BDWVR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
ControlBoard
OpenVVVF
260 × 45 mm239 parts8LCERN-OHL-W-2.015STM32
Sensors Module
Queens-Rocket-Engineering-Team
69.5 × 62.6 mm184 parts4LNo license3STM32
Av instrumentation
Queens-Rocket-Engineering-Team
69.5 × 62.6 mm184 parts4LNo license1STM32
QRET 23-24 SRAD Power Module
Queens-Rocket-Engineering-Team
69.5 × 62.6 mm112 parts4LNo license1STM32
QRET 23-24 SRAD Altimeter Module
Queens-Rocket-Engineering-Team
69.5 × 62.6 mm92 parts4LNo license1ESP32
Nx-PCBA
jgrano
110 × 85 mm78 parts2LNo license0J939-transceiver
karimf1
100 × 50 mm33 parts2LMIT0STM32
QRET 23-24 SRAD Communications Module
Queens-Rocket-Engineering-Team
69.5 × 62.6 mm69 parts4LNo license1RP2040/RP2350
ControlBoard
datacrystals
250 × 150 mm170 parts4LNo license0STM32
QRET 23-24 SRAD Power Module
Queens-Rocket-Engineering-Team
69.5 × 62.6 mm112 parts4LNo license3AVR/Arduino
HMI
datacrystals
250 × 150 mm158 parts4LNo license0STM32
QRET 23-24 SRAD Altimeter Module
Queens-Rocket-Engineering-Team
69.5 × 62.6 mm92 parts4LNo license3AVR/Arduino
DynamicBrakeGrid
datacrystals
350 × 150 mm151 parts4LNo license0STM32
Camera Module
Queens-Rocket-Engineering-Team
69.5 × 62.6 mm80 parts2LNo license3STM32
QRET 23-24 SRAD Altimeter Module
Queens-Rocket-Engineering-Team
69.5 × 62.6 mm92 parts4LNo license1STM32
QRET 23-24 SRAD Communications Module
Queens-Rocket-Engineering-Team
69.5 × 62.6 mm69 parts4LNo license3STM32
QRET 23-24 SRAD Communications Module
Queens-Rocket-Engineering-Team
69.5 × 62.6 mm69 parts4LNo license1
How designs wire the ISO1042BDWVR
Read from the KiCad layouts of 9 open source designs, one per repository: what each pin of the ISO1042BDWVR connects to, and the resistors, capacitors and other passives placed on it.
- The VCC1 pin has a decoupling capacitor on 8 of 9 designs, most often 100 nF (then 1 µF).
- The VCC2 pin has a decoupling capacitor on 7 of 9 designs, most often 100 nF (then 4.7 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VCC1pin 1 | Connected to: 3.3V 89% |
|
| GND1pin 4 | Connected to: GND 100% | — |
| GND2pin 5 | Connected to: GND 78% · a signal 22% | — |
| VCC2pin 8 | Connected to: 5V 78% · a signal 22% |
|
4 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include ControlBoard by OpenVVVF, QRET 23-24 SRAD Altimeter Module by Queens-Rocket-Engineering-Team, QRET 23-24 SRAD Altimeter Module by Queens-Rocket-Engineering-Team and Av instrumentation by Queens-Rocket-Engineering-Team.
The ISO1042BDWVR in open source designs
The gallery holds 17 open source boards using the ISO1042BDWVR from 10 GitHub repositories; a typical one measures about 69.5 × 62.6 mm and carries around 92 components.
82% use four copper layers or more, and 12% carry an open source license.
The most starred is ControlBoard by OpenVVVF.
Parts used alongside the ISO1042BDWVR
Microcontrollers on boards using the ISO1042BDWVR
What boards using the ISO1042BDWVR are built for
ISO1042BDWVR: common questions
Where can I find a ISO1042BDWVR reference design?
Each of the 17 boards on this page is a real design using the ISO1042BDWVR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the ISO1042BDWVR VCC1 pin?
The VCC1 pin has a decoupling capacitor on 8 of 9 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 9 open source designs using the ISO1042BDWVR.
What decoupling capacitors do designs use on the ISO1042BDWVR VCC2 pin?
The VCC2 pin has a decoupling capacitor on 7 of 9 designs, most often 100 nF (then 4.7 µF). Counted from the KiCad layouts of 9 open source designs using the ISO1042BDWVR.
What parts are used alongside the ISO1042BDWVR?
The AMS1117-3.3, LM66100DCKR, CP2102N-Axx-xQFN28, STM32F103CBT6 and TPM8837C-SO1R appear in the most repositories here.
Which microcontrollers do boards using the ISO1042BDWVR use?
Most are built on STM32 (12), AVR/Arduino (2), ESP32 (1) and RP2040/RP2350 (1).
How big is a typical board using the ISO1042BDWVR?
The median is 69.5 × 62.6 mm, and 18% are two-layer designs.
What is the most popular open source board using the ISO1042BDWVR?
By GitHub stars, ControlBoard by OpenVVVF, with 15 stars.
Can I simulate one of these boards using the ISO1042BDWVR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.