12 open source boards using the TPM8837C-SO1R
Real designs built with the TPM8837C-SO1R, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Sensors Module
Queens-Rocket-Engineering-Team
69.5 × 62.6 mm184 parts4LNo license3STM32
Av instrumentation
Queens-Rocket-Engineering-Team
69.5 × 62.6 mm184 parts4LNo license1STM32
QRET 23-24 SRAD Altimeter Module
Queens-Rocket-Engineering-Team
69.5 × 62.6 mm92 parts4LNo license1STM32
GPS Module
Queens-Rocket-Engineering-Team
69.5 × 62.6 mm61 parts4LNo license1STM32
QRET 23-24 SRAD Communications Module
Queens-Rocket-Engineering-Team
69.5 × 62.6 mm69 parts4LNo license1STM32
QRET 23-24 SRAD Altimeter Module
Queens-Rocket-Engineering-Team
69.5 × 62.6 mm92 parts4LNo license3STM32
Camera Module
Queens-Rocket-Engineering-Team
69.5 × 62.6 mm80 parts2LNo license3STM32
QRET 23-24 SRAD Altimeter Module
Queens-Rocket-Engineering-Team
69.5 × 62.6 mm92 parts4LNo license1STM32
QRET 23-24 SRAD Communications Module
Queens-Rocket-Engineering-Team
69.5 × 62.6 mm69 parts4LNo license3STM32
QRET 23-24 SRAD Communications Module
Queens-Rocket-Engineering-Team
69.5 × 62.6 mm69 parts4LNo license1STM32
GPS Module
Queens-Rocket-Engineering-Team
69.5 × 62.6 mm61 parts4LNo license3STM32
GPS Module
Queens-Rocket-Engineering-Team
69.5 × 62.6 mm61 parts4LNo license1
How designs wire the TPM8837C-SO1R
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the TPM8837C-SO1R connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 5 of 5 designs, most often 100 nF.
- The NSLEEP pin is tied to 3.3V on 5 of 5 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 4 | Connected to: GND 100% | — |
| NSLEEPpin 7 | Connected to: 3.3V 100% | — |
| VCCpin 8 | Connected to: 3.3V 100% |
|
5 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include QRET 23-24 SRAD Altimeter Module by Queens-Rocket-Engineering-Team, QRET 23-24 SRAD Altimeter Module by Queens-Rocket-Engineering-Team, Av instrumentation by Queens-Rocket-Engineering-Team and QRET 23-24 SRAD Altimeter Module by Queens-Rocket-Engineering-Team.
The TPM8837C-SO1R in open source designs
The gallery holds 12 open source boards using the TPM8837C-SO1R from 5 GitHub repositories; a typical one measures about 69.5 × 62.6 mm and carries around 75 components.
92% use four copper layers or more, and 0% carry an open source license.
The most starred is Sensors Module by Queens-Rocket-Engineering-Team.
Parts used alongside the TPM8837C-SO1R
Microcontrollers on boards using the TPM8837C-SO1R
What boards using the TPM8837C-SO1R are built for
TPM8837C-SO1R: common questions
Where can I find a TPM8837C-SO1R reference design?
Each of the 12 boards on this page is a real design using the TPM8837C-SO1R. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the TPM8837C-SO1R VCC pin?
The VCC pin has a decoupling capacitor on 5 of 5 designs, most often 100 nF. Counted from the KiCad layouts of 5 open source designs using the TPM8837C-SO1R.
How is the TPM8837C-SO1R NSLEEP pin connected?
The NSLEEP pin is tied to 3.3V on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the TPM8837C-SO1R.
What parts are used alongside the TPM8837C-SO1R?
The AMS1117-3.3, CP2102N-Axx-xQFN28, ISO1042BDWVR, LM66100DCKR and STM32F103CBT6 appear in the most repositories here.
Which microcontrollers do boards using the TPM8837C-SO1R use?
Most are built on STM32 (12).
How big is a typical board using the TPM8837C-SO1R?
The median is 69.5 × 62.6 mm, and 8% are two-layer designs.
What is the most popular open source board using the TPM8837C-SO1R?
By GitHub stars, Sensors Module by Queens-Rocket-Engineering-Team, with 3 stars.
Can I simulate one of these boards using the TPM8837C-SO1R before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.