HardLabs

ESP32-hema console

rapha-tech·ESP32-hema-console·PCB files/hema_console.kicad_pcb

ESP32-hema console PCB layout, top view — open source ESP32 board by rapha-tech

About the ESP32-hema console PCB

ESP32-hema console is an open source ESP32 PCB design by rapha-tech, published on GitHub. It is a 2-layer board measuring 33 × 50 mm, with 59 components from 34 distinct parts.

Its main chip is the ESP32-S3-WROOM-1, from the ESP32 family. Other key parts include the 74LVC1G17, NS4168, AP2112K-3.3, TP4054 and SN74LVC1G80DCKR. By type, the board carries 18 resistors, 15 capacitors, 10 switches, 6 ICs, 4 diodes and 2 transistors.

From the project

New PCB for the small console from hema to use an ESP32

Known problems : - The buttons doesn't make great contact compared to the original PCB

Components : - ESP32 module without PCB antenna - 1.54 inches IPS 240240px - about 33030mm battery or 415*30mm

Note : it is almost the same schematic as my Retro-Ruler ##

ESP32-hema console, from the project README
From the project README

Main components on the ESP32-hema console

74LVC1G17ESP32-S3-WROOM-1NS4168AP2112K-3.3TP4054SN74LVC1G80DCKR

ESP32-hema console bill of materials (BOM)

59 components, 34 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
74LVC1G17
U2
1
ESP32-S3-WROOM-1
U3
1
NS4168
U4
1
AP2112K-3.3
U5
1
TP4054
U6
1
SN74LVC1G80DCKR
U7
1
NPN_S9013
Q1
1
CJ3139K
Q2
1
USB_C_RECEPTACLE_USB2.0_14P
USB_C_Receptacle_USB2.0_14P
J1
1
Micro_SD_Card
J2
1
BATTERY_3.7V
battery_3.7v
B1
1
ST7789
DS1
1
Speaker
S1
1
LEFT
SW1
1
START
SW2
1
B
SW3
1
DOWN
SW4
1
UP
SW5
1
RIGHT
SW6
1
ON/OFF
SW7
Show 14 more
QtyPartRefs
1
MENU
SW8
1
A
SW10
1
RLED
D1
2
LESD5D5.0CT1G
D2, D4
1
BAT760
D5
2
10UF
10uF
C1, C8
6
100NF
100nF
C2, C5, C6, C7, C13, C15
2
2.2UF
2.2uF
C3, C14
5
1UF
1uF
C4, C9, C10, C11, C12
12
10K
R1, R2, R5, R6, R8, R9, R10, R13 +4
1
10R
R3
2
1K
R4, R7
1
4K7
R11
2
5K1
R15, R16

ESP32-hema console design files

The KiCad project lives in the rapha-tech/ESP32-hema-console repository on GitHub; these links point at the commit this page was built from.

ESP32-hema console: common questions

What microcontroller does the ESP32-hema console use?

The ESP32-hema console is built around the ESP32-S3-WROOM-1, from the ESP32 family.

How big is the ESP32-hema console PCB?

The ESP32-hema console measures 33 × 50 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the ESP32-hema console?

59 components, from 34 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the ESP32-hema console design files?

From the rapha-tech/ESP32-hema-console repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the ESP32-hema console design in my own project?

The repository has no license, so all rights stay with rapha-tech. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the ESP32-hema console without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards