5 open source boards using the SN74LVC1G80DCKR

Real designs built with the SN74LVC1G80DCKR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

5 boardsClear filters|Most starred

How designs wire the SN74LVC1G80DCKR

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the SN74LVC1G80DCKR connects to, and the resistors, capacitors and other passives placed on it.

  • The D pin has a series resistor on 4 of 5 designs, most often 0 Ω (then 10 kΩ).
  • The Q pin has a series resistor on 4 of 5 designs, most often 0 Ω (then 10 kΩ).
  • The VCC pin has a decoupling capacitor on 4 of 5 designs, most often 100 nF.
  • The D pin has a capacitor to GND on 2 of 5 designs, most often 1 µF.
Dpin 1Connected to: Signal 100%
  • Series resistor on 80% · 0 Ω (2), 10 kΩ (2), 100 Ω (2)
  • Capacitor to GND on 40% · 1 µF (2)
CLKpin 2Connected to: 74LVC1G17 40%
  • Series resistor on 40% · 0 Ω (2), 39 Ω (1)
GNDpin 3Connected to: GND 100%
Qpin 4Connected to: Signal 100%
  • Series resistor on 80% · 0 Ω (2), 10 kΩ (2), 100 Ω (2)
  • Pull-up to VBAT on 40% · 10 kΩ (2)
VCCpin 5Connected to: VCC 100%
  • Decoupling capacitor on 80% · 100 nF (7)

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Debugotron SWD Switch by alvarop, Si5351A by greatscottgadgets, ESP32-hema console by rapha-tech and HackRf-Circuit-Board-KiCad by GitByKaliMeNope.

The SN74LVC1G80DCKR in open source designs

The gallery holds 5 open source boards using the SN74LVC1G80DCKR from 5 GitHub repositories; a typical one measures about 52 × 70 mm and carries around 62 components.

60% use four copper layers or more, and 60% carry an open source license.

The most starred is Debugotron SWD Switch by alvarop.

Parts used alongside the SN74LVC1G80DCKR

Microcontrollers on boards using the SN74LVC1G80DCKR

What boards using the SN74LVC1G80DCKR are built for

SN74LVC1G80DCKR: common questions

Where can I find a SN74LVC1G80DCKR reference design?

Each of the 5 boards on this page is a real design using the SN74LVC1G80DCKR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What resistor goes on the SN74LVC1G80DCKR D pin?

The D pin has a series resistor on 4 of 5 designs, most often 0 Ω (then 10 kΩ). Counted from the KiCad layouts of 5 open source designs using the SN74LVC1G80DCKR.

What resistor goes on the SN74LVC1G80DCKR Q pin?

The Q pin has a series resistor on 4 of 5 designs, most often 0 Ω (then 10 kΩ). Counted from the KiCad layouts of 5 open source designs using the SN74LVC1G80DCKR.

What decoupling capacitors do designs use on the SN74LVC1G80DCKR VCC pin?

The VCC pin has a decoupling capacitor on 4 of 5 designs, most often 100 nF. Counted from the KiCad layouts of 5 open source designs using the SN74LVC1G80DCKR.

What parts are used alongside the SN74LVC1G80DCKR?

The 74AUP2G58GUX, 74LVC1G17, NS4168 and TP4054 appear in the most repositories here.

Which microcontrollers do boards using the SN74LVC1G80DCKR use?

Most are built on ESP32 (2) and NXP (1).

How big is a typical board using the SN74LVC1G80DCKR?

The median is 52 × 70 mm, and 40% are two-layer designs.

What is the most popular open source board using the SN74LVC1G80DCKR?

By GitHub stars, Debugotron SWD Switch by alvarop, with 52 stars.

Can I simulate one of these boards using the SN74LVC1G80DCKR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part