8 open source boards using the NS4168

Real designs built with the NS4168, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

8 boardsClear filters|Most starred

How designs wire the NS4168

Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the NS4168 connects to, and the resistors, capacitors and other passives placed on it.

  • The VDD pin has a decoupling capacitor on 7 of 8 designs, most often 10 µF (then 100 nF).
  • The CTRL pin has a resistor to GND on 6 of 8 designs, most often 1 kΩ (then 10 kΩ).
CTRLpin 1Connected to: The microcontroller 50%, a connector 25%
  • Resistor to GND on 75% · 1 kΩ (2), 10 kΩ (2), 100 kΩ (2)
VDDpin 6Connected to: VSYS_1 75% · a signal 25%
  • Decoupling capacitor on 88% · 10 µF (6), 100 nF (5), 1 µF (3)
GNDpin 7, 9Connected to: GND 88%

5 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Oniondao badge by OnionDAO-git, ESP32-hema console by rapha-tech, AiPocket-Kicad-ESP32-P4-seconde by zycero and Carrier by kkrzysztofik.

The NS4168 in open source designs

The gallery holds 8 open source boards using the NS4168 from 8 GitHub repositories; a typical one measures about 65.8 × 64 mm and carries around 116 components.

63% are two-layer designs, the rest use four layers or more, and 25% carry an open source license.

The most starred is Oniondao badge by OnionDAO-git.

Microcontrollers on boards using the NS4168

NS4168: common questions

Where can I find a NS4168 reference design?

Each of the 8 boards on this page is a real design using the NS4168. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the NS4168 VDD pin?

The VDD pin has a decoupling capacitor on 7 of 8 designs, most often 10 µF (then 100 nF). Counted from the KiCad layouts of 8 open source designs using the NS4168.

What resistor goes on the NS4168 CTRL pin?

The CTRL pin has a resistor to GND on 6 of 8 designs, most often 1 kΩ (then 10 kΩ). Counted from the KiCad layouts of 8 open source designs using the NS4168.

What parts are used alongside the NS4168?

The ESP32-S3-WROOM-1, 74LVC1G17, ATECC608B-SSHDA, CC1101RGP and CH340C appear in the most repositories here.

Which microcontrollers do boards using the NS4168 use?

Most are built on ESP32 (7).

How big is a typical board using the NS4168?

The median is 65.8 × 64 mm, and 63% are two-layer designs.

What is the most popular open source board using the NS4168?

By GitHub stars, Oniondao badge by OnionDAO-git, with 17 stars.

Can I simulate one of these boards using the NS4168 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part