ESP32-C6-IoT
rappepi·ESP32-C6-IoT-PCB·PCB/Projet elec puissance.kicad_pcb
About the ESP32-C6-IoT PCB
ESP32-C6-IoT is an open source ESP32 PCB design by rappepi, published on GitHub under the CC-BY-NC-4.0 license. It is a 4-layer board measuring 20 × 41.5 mm, with 73 components from 45 distinct parts.
Its main chip is the ESP32-C6-MINI-1-N4, from the ESP32 family. Other key parts include the BQ298015RUGR, MAX17048G+T10, USBLC6-2SC6, BME688 and BQ25300RTER. By type, the board carries 25 capacitors, 24 resistors, 8 ICs, 3 transistors, 3 diodes and 2 connectors.
It belongs with the iot & wireless and power & battery designs in this gallery.
From the project
This project is licensed under the Creative Commons Attribution-NonCommercial 4.0 International (CC BY-NC 4.0). You are free to use, modify, and share the project as long as it is not for commercial use and you give appropriate credit to the original author.

Main components on the ESP32-C6-IoT
ESP32-C6-IoT bill of materials (BOM)
73 components, 45 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | BQ298015RUGR | X2QFN-8_L1.5-W1.5-P0.50-TL | U1 |
| 1 | ESP32-C6-MINI-1-N4 | WIFIM-SMD_61P-L16.6-W13.2-P0.80-ESP32-C6-MINI-1-N4 | U2 |
| 1 | MAX17048G+T10 | DFN-8_L2.0-W2.0-P0.50-BL-EP | U3 |
| 1 | USBLC6-2SC6 | SOT-23-6 | U5 |
| 1 | BME688 | Bosch_LGA-8_3x3mm_P0.8mm_ClockwisePinNumbering | U6 |
| 1 | BQ25300RTER | QFN-16_L3.0-W3.0-P0.50-BL-EP1.7 | U7 |
| 1 | SN74LVC1T45DRL | SOT-563 | U8 |
| 1 | TPS631000DRLR | SOT-583-8_L2.1-W1.2-P0.50-LS1.6-BL | U9 |
| 2 | RT1A050ZPTR | TSST8-8_L3.0-W1.6-P0.65-LS2.0-BL | Q1, Q2 |
| 1 | DMN2016LHAB-7 | U-DFN2030-6_L2.0-W3.0-P0.65-BL-EP | Q4 |
| 1 | 32.768KHZ | Crystal_SMD_2012-2Pin_2.0x1.2mm | Y1 |
| 1 | USB_C_RECEPTACLE_USB2.0_16P USB_C_Receptacle_USB2.0_16P | USB_C_Receptacle_G-Switch_GT-USB-7010ASV | J1 |
| 1 | C495198 BAT | CONN-SMD_SM02B-PASS-TLFSN | J2 |
| 1 | ASMD1812-300 | R_1812_4532Metric_Pad1.30x3.40mm_HandSolder | F1 |
| 1 | C14165 3A | Fuse_1206_3216Metric_Pad1.42x1.75mm_HandSolder | F2 |
| 1 | C160404 PIR SENS | CONN-SMD_4P-P1.00_SM04B-SRSS-TB-LF-SN | JP3 |
| 2 | KMR221GLFS | KEY-SMD_KMR2XXGXXX | SW1, SW2 |
| 1 | LED | LED_0402_1005Metric_Pad0.77x0.64mm_HandSolder | D1 |
| 1 | BAT54XV2T1G | D_SOD-523 | D2 |
| 1 | WS2812B-2020 | LED_WS2812B-2020_PLCC4_2.0x2.0mm | D3 |
Show 25 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 1u | L1008 | L1, L2 |
| 1 | 22U 22u | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1 |
| 1 | 47U 47u | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2 |
| 4 | 2.2U 2.2u | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C3, C4, C7, C13 |
| 4 | 10U 10u | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C5, C8, C9, C14 |
| 1 | 47N 47n | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C6 |
| 1 | 1u | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C10 |
| 10 | 100N 100n | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C11, C12, C17, C18, C19, C20, C21, C22 +2 |
| 2 | 12P 12p | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C15, C16 |
| 1 | 47U 47u | CP_EIA-6032-28_Kemet-C | C25 |
| 9 | 10K 10k | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R1, R4, R10, R11, R12, R14, R15, R22 +1 |
| 1 | 511K 511k | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R2 |
| 1 | 91K 91k | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R3 |
| 2 | 5K1 5k1 | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R5, R6 |
| 1 | C25765 20k 1% | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R7 |
| 1 | 1k | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R8 |
| 1 | 51K 51k | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R9 |
| 1 | C25921 80k 1% | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R16 |
| 1 | 20 | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R17 |
| 1 | 300 | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R18 |
| 1 | C601095 3m 1% | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R19 |
| 1 | 2k | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R20 |
| 1 | C521527 0.5m 1% | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R21 |
| 1 | 10M | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R24 |
| 1 | 2.2K 2.2k | R_Array_Concave_4x0402 | RN1 |
ESP32-C6-IoT design files
The KiCad project lives in the rappepi/ESP32-C6-IoT-PCB repository on GitHub; these links point at the commit this page was built from.
ESP32-C6-IoT: common questions
What microcontroller does the ESP32-C6-IoT use?
The ESP32-C6-IoT is built around the ESP32-C6-MINI-1-N4, from the ESP32 family.
How big is the ESP32-C6-IoT PCB?
The ESP32-C6-IoT measures 20 × 41.5 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the ESP32-C6-IoT?
73 components, from 45 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the ESP32-C6-IoT design files?
From the rappepi/ESP32-C6-IoT-PCB repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the ESP32-C6-IoT design in my own project?
It is published under CC-BY-NC-4.0, which limits how it may be reused; read the license before building on it.
Can I test firmware for the ESP32-C6-IoT without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k