ESP32-S3-keyboard

rappepi·ESP32-S3-keyboard·hardware/Clavier.kicad_pcb

ESP32-S3-keyboard PCB layout, top view — open source ESP32 board by rappepi

About the ESP32-S3-keyboard PCB

ESP32-S3-keyboard is an open source ESP32 PCB design by rappepi, published on GitHub under the CC-BY-NC-4.0 license. It is a 4-layer board measuring 435 × 150 mm, with 575 components from 35 distinct parts.

Its main chip is the ESP32-S3-N16R8-WROOM-1, from the ESP32 family. Other key parts include the AMS1117-3.3, 74HC595, USBLC6-2SC6, 74AHCT1G125 and LIS3DH. By type, the board carries 159 capacitors, 120 LEDs, 120 diodes, 31 resistors, 10 ICs and 10 switches.

It belongs with the keyboards designs in this gallery.

From the project

This project is licensed under the Creative Commons Attribution-NonCommercial 4.0 International (CC BY-NC 4.0). You are free to use, modify, and share the project as long as it is not for commercial use and you give appropriate credit to the original author.

ESP32-S3-keyboard, from the project README
From the project README

Main components on the ESP32-S3-keyboard

ESP32-S3-keyboard bill of materials (BOM)

575 components, 35 distinct parts.

QtyPartRefs
1
ESP32-S3-N16R8-WROOM-1
U1
1
AMS1117-3.3
U2
3
74HC595
U3, U4, U5
1
USBLC6-2SC6
U6
2
74AHCT1G125
U7, U8
1
LIS3DH
U10
1
MT9700
U11
1
USB_C_Receptacle_USB2.0_16P
J1
1
Conn_01x04_Pin
J2
1
SolderJumper_3_Open
JP1
120
MX_SW_HS
MX1, MX2, MX3, MX4, MX5, MX6, MX7, MX8 +112
2
R_Potentiometer_Dual_MountingPin
RV1, RV2
5
MX_stab
S1, S3, S4, S5, S7
1
MX_stab
S2
1
MX_stab
S6
2
SW_Push
SW1, SW2
1
RotaryEncoder
SW3
120
MX_SK6812MINI-E
LED1, LED2, LED3, LED4, LED5, LED6, LED7, LED8 +112
120
1N4148W
D1, D2, D3, D4, D5, D6, D7, D8 +112
134
100nF
C1, C2, C3, C4, C5, C6, C7, C8 +126
Show 15 more
QtyPartRefs
2
1uF
C121, C124
2
10uF
C122, C123
8
10uF
C131, C132, C133, C153, C154, C156, C157, C158
5
1uF
C138, C139, C140, C148, C149
7
100nF
C141, C142, C143, C144, C145, C146, C147
1
22uF
C152
1
10k
R1
3
5.1k
R2, R3, R28
3
1k
R4, R27, R30
8
1.5k
R5, R7, R9, R11, R13, R15, R17, R29
7
2.2k
R6, R8, R10, R12, R14, R16, R18
2
100
R19, R22
2
27
R20, R21
3
10k
R23, R24, R25
2
3.3k
R26, R31

ESP32-S3-keyboard design files

The KiCad project lives in the rappepi/ESP32-S3-keyboard repository on GitHub; these links point at the commit this page was built from.

ESP32-S3-keyboard: common questions

What microcontroller does the ESP32-S3-keyboard use?

The ESP32-S3-keyboard is built around the ESP32-S3-N16R8-WROOM-1, from the ESP32 family.

How big is the ESP32-S3-keyboard PCB?

The ESP32-S3-keyboard measures 435 × 150 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the ESP32-S3-keyboard?

575 components, from 35 distinct parts. The full bill of materials is listed on this page.

Where can I download the ESP32-S3-keyboard design files?

From the rappepi/ESP32-S3-keyboard repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the ESP32-S3-keyboard design in my own project?

It is published under CC-BY-NC-4.0, which limits how it may be reused; read the license before building on it.

Can I test firmware for the ESP32-S3-keyboard without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards