ESP32 C3 Slave

RoboDurden·Esp32_20A_80V_dcdc·KiCad PCB v2/ESP32 C3 Slave.kicad_pcb

ESP32 C3 Slave PCB layout, top view — open source ESP32 board by RoboDurden

About the ESP32 C3 Slave PCB

ESP32 C3 Slave is an open source ESP32 PCB design by RoboDurden, published on GitHub under the MIT license. It is a 2-layer board measuring 91.1 × 33.2 mm, with 22 components from 19 distinct parts.

Its main chip is the ESP32_C3_Super_Mini, from the ESP32 family. Other key parts include the 128x64, B0515S and EG2104. By type, the board carries 6 ICs, 6 connectors, 5 resistors, 3 capacitors and 2 transistors.

It belongs with the displays & leds, power & battery and iot & wireless designs in this gallery.

From the project

20A 80V dcdc/mppt with Esp32 and touch display

$2 pcb order at JLPCB ("Add gerber file" upload button): https://github.com/RoboDurden/Esp3220A80Vdcdc/blob/main/KiCad%20PCB%20v2/production/Esp20A80V2024-05-12_13-24-33/Esp20A80V.zip

All GPIO pins to alternative headers. All headers on 2.54mm grid for prototyping board.

PCB and S2Mini are cheap, so simply solder S2Mini to backside. The tin solder should quickly be sucked into the holes of the S2_Mini and connect to the holes of the pcb :-)

ESP32 C3 Slave, from the project README
From the project README

Main components on the ESP32 C3 Slave

ESP32 C3 Slave bill of materials (BOM)

22 components, 19 distinct parts — part numbers from the project's BOM.

QtyPartRefs
2
128x64
U1, U3
1
B0515S
U2
1
ESP32_C3_Super_Mini
U4
2
EG2104
U5, U6
1
SI2300
IRF3206
Q1
1
SI2305
IRF3206
Q2
2
I2C
J1, J2
1
I2C/UART
SPI
J3
1
V+
J4
1
Out1
J5
1
Out2
J6
1
220NF
4,7μF
C1
1
220NF
0,1μF
C2
1
1μF
C3
1
10k
R1
1
3.9K
10k
R2
1
10
R3
1
3.9K
10
R4
1
75K
1k
R5

ESP32 C3 Slave design files

The KiCad project lives in the RoboDurden/Esp32_20A_80V_dcdc repository on GitHub; these links point at the commit this page was built from.

ESP32 C3 Slave: common questions

What microcontroller does the ESP32 C3 Slave use?

The ESP32 C3 Slave is built around the ESP32_C3_Super_Mini, from the ESP32 family.

How big is the ESP32 C3 Slave PCB?

The ESP32 C3 Slave measures 91.1 × 33.2 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the ESP32 C3 Slave?

22 components, from 19 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the ESP32 C3 Slave design files?

From the RoboDurden/Esp32_20A_80V_dcdc repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the ESP32 C3 Slave design in my own project?

Yes, under the terms of its MIT license, which RoboDurden chose for the repository.

Can I test firmware for the ESP32 C3 Slave without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in Esp32_20A_80V_dcdc

Similar boards