ESP32C3 Slave PROFET

RoboDurden·Esp32_20A_80V_dcdc·KiCad PCB v3/ESP32C3_Slave_PROFET.kicad_pcb

ESP32C3 Slave PROFET PCB layout, top view — open source ESP32 board by RoboDurden

About the ESP32C3 Slave PROFET PCB

ESP32C3 Slave PROFET is an open source ESP32 PCB design by RoboDurden, published on GitHub under the MIT license. It is a 2-layer board measuring 80 × 33 mm, with 29 components from 24 distinct parts.

Its main chip is the ESP32_C3_Super_Mini, from the ESP32 family. Other key parts include the 128x64, BTS50055 and MAX809. By type, the board carries 11 connectors, 10 resistors, 4 ICs, 2 transistors and 2 diodes.

It belongs with the displays & leds, power & battery and iot & wireless designs in this gallery.

From the project

20A 80V dcdc/mppt with Esp32 and touch display

$2 pcb order at JLPCB ("Add gerber file" upload button): https://github.com/RoboDurden/Esp3220A80Vdcdc/blob/main/KiCad%20PCB%20v2/production/Esp20A80V2024-05-12_13-24-33/Esp20A80V.zip

All GPIO pins to alternative headers. All headers on 2.54mm grid for prototyping board.

PCB and S2Mini are cheap, so simply solder S2Mini to backside. The tin solder should quickly be sucked into the holes of the S2_Mini and connect to the holes of the pcb :-)

ESP32C3 Slave PROFET, from the project README
From the project README

Main components on the ESP32C3 Slave PROFET

ESP32C3 Slave PROFET bill of materials (BOM)

29 components, 24 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
128x64
U1
1
ESP32_C3_Super_Mini
U2
1
BTS50055
U3
1
MAX809
BTS50055
U4
1
SI2305
BSS138
Q1
1
SI2300
BSS138
Q2
1
I2C/UART
I2C
J1
1
I2C
J2
2
mount
J3, J4
1
SPI
J5
2
V+
J6, J11
2
Out1
J7, J8
2
Out2
J9, J10
2
3V
D1, D2
1
910
10k
R1
1
12K
10k
R2
1
910
2k
R3
1
12K
100
R4
1
75K
1k
R5
1
33K
2k
R6
Show 4 more
QtyPartRefs
1
120
2k
R7
1
100K
100
R8
1
3K9
1k
R9
1
100K
2k
R10

ESP32C3 Slave PROFET design files

The KiCad project lives in the RoboDurden/Esp32_20A_80V_dcdc repository on GitHub; these links point at the commit this page was built from.

ESP32C3 Slave PROFET: common questions

What microcontroller does the ESP32C3 Slave PROFET use?

The ESP32C3 Slave PROFET is built around the ESP32_C3_Super_Mini, from the ESP32 family.

How big is the ESP32C3 Slave PROFET PCB?

The ESP32C3 Slave PROFET measures 80 × 33 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the ESP32C3 Slave PROFET?

29 components, from 24 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the ESP32C3 Slave PROFET design files?

From the RoboDurden/Esp32_20A_80V_dcdc repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the ESP32C3 Slave PROFET design in my own project?

Yes, under the terms of its MIT license, which RoboDurden chose for the repository.

Can I test firmware for the ESP32C3 Slave PROFET without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in Esp32_20A_80V_dcdc

Similar boards