3 open source boards using the B0515S
Real designs built with the B0515S, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/Arduino
BMS MK2 attempt 1-using-Tp4506
Wierdwizard2587
226.6 × 64 mm42 parts2LNo license1ESP32
ESP32C3 Slave N-CH
RoboDurden
80 × 33 mm23 parts2LMIT2ESP32
ESP32 C3 Slave
RoboDurden
91.1 × 33.2 mm22 parts2LMIT2
The B0515S in open source designs
The gallery holds 3 open source boards using the B0515S from 2 GitHub repositories; a typical one measures about 91.1 × 33.2 mm and carries around 23 components.
100% are two-layer designs, the rest use four layers or more, and 67% carry an open source license.
The most starred is ESP32C3 Slave N-CH by RoboDurden.
Microcontrollers on boards using the B0515S
What boards using the B0515S are built for
B0515S: common questions
Where can I find a B0515S reference design?
Each of the 3 boards on this page is a real design using the B0515S. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the B0515S use?
Most are built on ESP32 (2) and AVR/Arduino (1).
How big is a typical board using the B0515S?
The median is 91.1 × 33.2 mm, and 100% are two-layer designs.
What is the most popular open source board using the B0515S?
By GitHub stars, ESP32C3 Slave N-CH by RoboDurden, with 2 stars.
Can I simulate one of these boards using the B0515S before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.