Solar-Telescope-Redesign
RomiFC·Solar-Telescope-Redesign·PCB Design/002.35.25.05.20-001-PCB-SolarTele.kicad_pcb
About the Solar-Telescope-Redesign PCB
Solar-Telescope-Redesign is an open source PCB design by RomiFC, published on GitHub. It is a 2-layer board measuring 128.3 × 45.7 mm, with 22 components from 19 distinct parts.
Other key parts include the L7815, L7805, LM358 and L7912. By type, the board carries 6 capacitors, 4 ICs, 4 connectors, 3 resistors and 2 diodes.
It belongs with the power & battery and science & space designs in this gallery.
From the project
- Board characteristics to assembly drawing. - Board dimensioning to assembly drawing. - Test points at different stages of amplification. - Layer indicator to top left of assembly drawing. - L7912C Negative LDO (Will require additional power supply). - Summing amplifier stage wh
- Board characteristics to assembly drawing. - Board dimensioning to assembly drawing. - Test points at different stages of amplification. - Layer indicator to top left of assembly drawing. - L7912C Negative LDO (Will require additional power supply). - Summing amplifier stage which will subtract a voltage from the output of the ADL5902-EVALZ in attempt to bring the noise floor closer to 0VDC
Main components on the Solar-Telescope-Redesign
Solar-Telescope-Redesign bill of materials (BOM)
22 components, 19 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | L7815 L7812 | TO-263-2 | U1 |
| 1 | L7805 | TO-263-2 | U2 |
| 1 | LM358 | DIP-8_W7.62mm | U4 |
| 1 | L7912 | TO-263-2 | U5 |
| 1 | SCREW_TERMINAL_01X08 Screw_Terminal_01x08 | TerminalBlock_Phoenix_MKDS-3-8-5.08_1x08_P5.08mm_Horizontal | J1 |
| 1 | CONN_01X01 Screw_Terminal_01x03 | TerminalBlock_Phoenix_MKDS-3-3-5.08_1x03_P5.08mm_Horizontal | J2 |
| 1 | Screw_Terminal_01x03 | TerminalBlock_Phoenix_MKDS-3-3-5.08_1x03_P5.08mm_Horizontal | J3 |
| 1 | Screw_Terminal_01x02 | TerminalBlock_Phoenix_MKDS-3-2-5.08_1x02_P5.08mm_Horizontal | J4 |
| 1 | TestPoint | TestPoint_Loop_D2.54mm_Drill1.5mm_Beaded | -12VDC |
| 1 | 10K 510 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | Rf1 |
| 1 | 10K 10k | Potentiometer_Bourns_3386P_Vertical | Rf2 |
| 2 | 1N4001 | D_DO-41_SOD81_P10.16mm_Horizontal | D1, D2 |
| 2 | 0.33UF 0.33uF | CP_EIA-3216-10_Kemet-I_Pad1.58x1.35mm_HandSolder | C1, C3 |
| 2 | 0.1UF 0.1uF | CP_EIA-3216-10_Kemet-I_Pad1.58x1.35mm_HandSolder | C2, C4 |
| 1 | 2.2uF | CP_EIA-3216-10_Kemet-I_Pad1.58x1.35mm_HandSolder | C5 |
| 1 | 1uF | CP_EIA-3216-10_Kemet-I_Pad1.58x1.35mm_HandSolder | C6 |
| 1 | 50k | Potentiometer_Bourns_3386P_Vertical | R1 |
| 1 | 1k | Potentiometer_Bourns_3386P_Vertical | R2 |
| 1 | 60.3 510 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R3 |
Solar-Telescope-Redesign design files
The KiCad project lives in the RomiFC/Solar-Telescope-Redesign repository on GitHub; these links point at the commit this page was built from.
Solar-Telescope-Redesign: common questions
How big is the Solar-Telescope-Redesign PCB?
The Solar-Telescope-Redesign measures 128.3 × 45.7 mm, has 2 copper layers and is 1.6256 mm thick.
How many components are on the Solar-Telescope-Redesign?
22 components, from 19 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Solar-Telescope-Redesign design files?
From the RomiFC/Solar-Telescope-Redesign repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Solar-Telescope-Redesign design in my own project?
The repository has no license, so all rights stay with RomiFC. Use it as a reference, and ask the author before reusing the design.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1k