14 open source boards using the L7815
Real designs built with the L7815, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Asteroids
nmikstas
290.8 × 482.6 mm490 parts2LNo license23Edm power board
strombom
240 × 80 mm150 parts4LNo license7PI wt hold for laser intensity lock
JQIamo
62.8 × 172 mm124 parts4LNo license1STM32
I2C Motor Driver
Stevemwa
86.1 × 66.3 mm98 parts4LNo license1NeuroGoGo
asgardee
156.4 × 106.7 mm64 parts2LNo license1Projects
hasanyucelcogal
55.9 × 37.5 mm32 parts2LNo license0Solar-Telescope-Redesign
RomiFC
128.3 × 45.7 mm22 parts2LNo license0Stereo Preamplifier
PeraZver
83 × 54 mm51 parts2LNo license7Auxiliary board - DJ filter FX unit
yminp
148.6 × 82 mm134 parts2LCERN-OHL-W-2.00DD Power 1
Acmex2564
110 × 47.8 mm91 parts4LNo license19Solstrejf PSU & Stereo Mixer
KamikazeVildsvin
114.9 × 54 mm39 parts2LGPL-3.01Smu pwr 1
jaromir-sukuba
100 × 82 mm38 parts2LNo license188DD Power 2
Acmex2564
110 × 47.8 mm51 parts2LNo license19DelSol PSU
dzavalishin
122.6 × 50.8 mm61 parts2LNo license3
How designs wire the L7815
Read from the KiCad layouts of 13 open source designs, one per repository: what each pin of the L7815 connects to, and the resistors, capacitors and other passives placed on it.
- The OUT pin is tied to 15V on 12 of 13 designs.
- The IN pin has a capacitor to GND on 9 of 13 designs, most often 330 nF (then 1 mF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| INpin 1 | Connected to: Signal 54% · 24V 46% |
|
| GNDpin 2 | Connected to: GND 100% | — |
| OUTpin 3 | Connected to: 15V 92% | — |
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Smu pwr 1 by jaromir-sukuba, Asteroids PCB by nmikstas, DD Power 1 by Acmex2564 and Stereo Preamplifier by PeraZver.
The L7815 in open source designs
The gallery holds 14 open source boards using the L7815 from 13 GitHub repositories; a typical one measures about 112.5 × 60.2 mm and carries around 63 components.
71% are two-layer designs, the rest use four layers or more, and 14% carry an open source license.
The most starred is Smu pwr 1 by jaromir-sukuba.
Microcontrollers on boards using the L7815
What boards using the L7815 are built for
L7815: common questions
Where can I find a L7815 reference design?
Each of the 14 boards on this page is a real design using the L7815. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the L7815 OUT pin connected?
The OUT pin is tied to 15V on 12 of 13 designs. Counted from the KiCad layouts of 13 open source designs using the L7815.
How is the L7815 IN pin connected?
The IN pin has a capacitor to GND on 9 of 13 designs, most often 330 nF (then 1 mF). Counted from the KiCad layouts of 13 open source designs using the L7815.
What parts are used alongside the L7815?
The L7915, L7805, LM358 and TL072 appear in the most repositories here.
Which microcontrollers do boards using the L7815 use?
Most are built on STM32 (1).
How big is a typical board using the L7815?
The median is 112.5 × 60.2 mm, and 71% are two-layer designs.
What is the most popular open source board using the L7815?
By GitHub stars, Smu pwr 1 by jaromir-sukuba, with 188 stars.
Can I simulate one of these boards using the L7815 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.