Radioberry preamp
About the Radioberry preamp PCB
Radioberry preamp is an open source PCB design by saktheeswaranswan, published on GitHub. It is a 2-layer board measuring 65 × 56 mm, with 137 components from 59 distinct parts.
Other key parts include the LD1117S33, ST1S10, LP2985, MAX11613 and MCP4662. By type, the board carries 57 capacitors, 37 resistors, 10 connectors, 6 ICs, 6 transistors and 4 inductors.
It belongs with the rf & radio designs in this gallery.
From the project
RadioBerry V2.0 - Ham radio cape for Raspberry PI ==============================================
RadioBerry V2.0 - Ham radio cape for Raspberry PI ==============================================
- Building a HAM Radio - Learning (from noob to guru)
WIKI FOR MORE DETAILS: https://github.com/pa3gsb/Radioberry-2.x/wiki
- Raspberry PI - Radio extension board (cape) - using AD9866 (12 bit) for RX and TX modes.
Main components on the Radioberry preamp
Radioberry preamp bill of materials (BOM)
137 components, 59 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LD1117S33 | V-REG_SOT223 | IC101 |
| 1 | ST1S10 | ST1S10 | U101 |
| 1 | LP2985 | SOT23 | U102 |
| 1 | MAX11613 | MAX11613 | U201 |
| 1 | MCP4662 | SOIC-10 | U202 |
| 1 | INA199A1DC | PE4259 | U301 |
| 1 | DMP3099L | SOT23_3 | Q101 |
| 1 | MCP9700 | SOT23_3 | Q201 |
| 2 | NUD3124 | SOT23_3 | Q202, Q203 |
| 2 | LDMOS | COMBORFGND | Q301, Q302 |
| 1 | PS | PWRBARREL2 | CN101 |
| 7 | JNC | SMD-0603 | J201, J202, J203, J205, J207, J301, J302 |
| 2 | DNI | SMD-0603 | J204, J206 |
| 2 | RFD2b | 2x1 | DB201, DB202 |
| 1 | IO10 | 5x2 | DB203 |
| 1 | Polyfuse | FUSE | F101 |
| 1 | PINHEAD_PINHD-2X10 | PINHEAD_2X10 | JP201 |
| 1 | NA3WK-K | DPDT_GND | K301 |
| 5 | DNI | m3 | MH1, MH2, MH3, MH4, MH5 |
| 3 | SMA | SMAEDGE_THFULL_L | RF301, RF302, RF303 |
Show 39 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 4:1 Z | BN202V | T301 |
| 1 | 1:1 | TRANSFSMT | T302 |
| 1 | TVSANTI | smbj18ca | D101 |
| 3 | FB | SMD-0603 | FB101, FB102, FB201 |
| 1 | 3.3uH | GENERICPSL | L101 |
| 4 | 10uF | SMD-1206 | C101, C102, C110, C113 |
| 1 | 4.7uF | SMD-0805 | C103 |
| 1 | 4n7 | SMD-0603 | C104 |
| 6 | 22uF | SMD-0805 | C105, C106, C107, C108, C109, C305 |
| 5 | 1uF | SMD-0805 | C111, C306, C307, C308, C309 |
| 3 | 100nF | SMD-0603 | C112, C114, C117 |
| 2 | 1nF | SMD-0603 | C115, C123 |
| 1 | 10nF | SMD-0603 | C116 |
| 1 | 100uF | SMD-1206 | C118 |
| 2 | 10pF | SMD-0603 | C119, C121 |
| 2 | 100pF | SMD-0603 | C120, C122 |
| 4 | 4.7nF | SMD-0603 | C201, C203, C207, C208 |
| 17 | 0.1uF | SMD-0603 | C202, C206, C209, C303, C304, C311, C313, C314 +9 |
| 4 | 1uF | SMD-0603 | C204, C205, C210, C211 |
| 2 | DNI | SMD-0805 | C301, C302 |
| 1 | 100pF | SMD-0805 | C310 |
| 1 | 390pF | SMD-0805 | C312 |
| 3 | 10K | SMD-0603 | R101, R214, R215 |
| 1 | 16K2 | SMD-0603 | R102 |
| 1 | 1K8 | SMD-0603 | R103 |
| 1 | 4k7 | SMD-0603 | R104 |
| 4 | 2.2K | SMD-0603 | R201, R202, R217, R218 |
| 4 | 1K | SMD-0603 | R203, R206, R208, R209 |
| 4 | 100 | SMD-0603 | R204, R207, R220, R221 |
| 3 | 270 | SMD-0603 | R205, R304, R311 |
| 2 | 27K | SMD-0603 | R210, R211 |
| 2 | 9.1K | SMD-0603 | R212, R213 |
| 2 | 4.7K | SMD-0603 | R216, R219 |
| 2 | DNI | SMD-0805 | R301, R302 |
| 1 | 0.04 | SMD-1206 | R303 |
| 2 | 1K | SMD-0805 | R305, R308 |
| 2 | 12 | SMD-0805 | R306, R312 |
| 1 | 5.769 | SMD-0805 | R307 |
| 2 | 869.548 | SMD-0805 | R309, R310 |
Radioberry preamp design files
The KiCad project lives in the saktheeswaranswan/Ham-monk-RadioBerry-V2.0---Ham-radio-cape-for-Raspberry-PI repository on GitHub; these links point at the commit this page was built from.
Radioberry preamp: common questions
How big is the Radioberry preamp PCB?
The Radioberry preamp measures 65 × 56 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Radioberry preamp?
137 components, from 59 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Radioberry preamp design files?
From the saktheeswaranswan/Ham-monk-RadioBerry-V2.0---Ham-radio-cape-for-Raspberry-PI repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Radioberry preamp design in my own project?
The repository has no license, so all rights stay with saktheeswaranswan. Use it as a reference, and ask the author before reusing the design.
More boards in Ham-monk-RadioBerry-V2.0---Ham-radio-cape-for-Raspberry-PI
Similar boards
Hat
pa3gsb
65 × 56 mm81 parts2LNo license675
Radioberry juice
65 × 56 mm87 parts2LNo license675
Radioberry preamp
65 × 56 mm137 parts2LNo license675
Hermes-Lite Small IO Expansion
softerhardware
18.4 × 12.5 mm6 parts2LNo license372
Hermes-Lite Jumper With IO
21.9 × 51.7 mm12 parts2LNo license372
Hermes-Lite PureSignal Feedback
17.1 × 15.4 mm6 parts2LNo license372