21 open source boards using the LD1117S33
Real designs built with the LD1117S33, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
FPGA
Radioberry
pa3gsb
65 × 56 mm143 parts4LNo license675STM32 VGM Player YM2612 SN76489
AidanHockey5
138.4 × 91.4 mm84 parts2LAGPL-3.0117RadioBerry
pa3gsb
85.3 × 56 mm114 partsNo license54AVR/Arduino
I2S-Hat
raptorlightning
65 × 56 mm94 parts4LGPL-3.019STM32
Main
wgbowley
60 × 40 mm59 parts2LMIT10STM32
Loran c proc board
romavis
170 × 100 mm243 parts4LCC-BY-SA-4.07FPGA
Radioberry
OE9SAU
65 × 56 mm143 parts4LNo license4Sam17-vco
sssamuelll
114 × 124 mm129 parts4LCERN-OHL-S-2.02Development board
inoa-io
153 × 77 mm97 parts2LCERN-OHL-P-2.02Sam17-vco
sssamuelll
114 × 124 mm129 parts4LCERN-OHL-S-2.01RP2040/RP2350
Rp2350-boards
abzman
21 × 66.9 mm62 parts2LUnlicense1FPGA
Radioberry
saktheeswaranswan
65 × 56 mm143 parts4LNo license0STM32 VGM Player YM2612 SN76489
Vakon84
138.4 × 91.4 mm84 parts2LAGPL-3.00Radioberry preamp
pa3gsb
65 × 56 mm137 parts2LNo license675STM32
Teensy SFOC
wgbowley
100 × 80 mm19 parts2LMIT10Sam17-power v3
sssamuelll
200 × 150 mm97 parts2LCERN-OHL-S-2.02Lps regulator rev 12
jerryok826
136.2 × 62.6 mm122 parts2LMIT1Sam17-power v3
sssamuelll
200 × 150 mm97 parts2LCERN-OHL-S-2.01Radioberry preamp
saktheeswaranswan
65 × 56 mm137 parts2LNo license0Vswr extension bridge route
OE9SAU
83.7 × 37 mm50 parts2LNo license4Debug module
inoa-io
40.6 × 30.4 mm34 parts2LCERN-OHL-P-2.02
How designs wire the LD1117S33
Read from the KiCad layouts of 14 open source designs, one per repository: what each pin of the LD1117S33 connects to, and the resistors, capacitors and other passives placed on it.
- The VI pin has a decoupling capacitor on 11 of 14 designs, most often 100 nF (then 10 µF).
- Pin 4 has a capacitor to GND on 5 of 7 designs, most often 100 µF (then 1 nF).
- Pin 4 has a ferrite bead on 3 of 7 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 1 | Connected to: GND 86% | — |
| VIpin 3 | Connected to: 5V 79% · a signal 21% |
|
| Pin 4 | Connected to: Signal 43% · GND 29% · 3.3V 29% |
|
1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Radioberry by pa3gsb, STM32 VGM Player YM2612 SN76489 by AidanHockey5, RadioBerry by pa3gsb and I2S-Hat by raptorlightning.
The LD1117S33 in open source designs
The gallery holds 21 open source boards using the LD1117S33 from 14 GitHub repositories; a typical one measures about 85.3 × 62.6 mm and carries around 97 components.
65% are two-layer designs, the rest use four layers or more, and 67% carry an open source license.
The most starred is Radioberry by pa3gsb.
Parts used alongside the LD1117S33
Microcontrollers on boards using the LD1117S33
What boards using the LD1117S33 are built for
LD1117S33: common questions
Where can I find a LD1117S33 reference design?
Each of the 21 boards on this page is a real design using the LD1117S33. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the LD1117S33 VI pin?
The VI pin has a decoupling capacitor on 11 of 14 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 14 open source designs using the LD1117S33.
How is the LD1117S33 pin 4 connected?
Pin 4 has a capacitor to GND on 5 of 7 designs, most often 100 µF (then 1 nF). Counted from the KiCad layouts of 14 open source designs using the LD1117S33.
What parts are used alongside the LD1117S33?
The AD9866, LD1117S12, LD1117S25, FPGA and INA199A1DC appear in the most repositories here.
Which microcontrollers do boards using the LD1117S33 use?
Most are built on FPGA (3), STM32 (3), AVR/Arduino (1) and RP2040/RP2350 (1).
How big is a typical board using the LD1117S33?
The median is 85.3 × 62.6 mm, and 65% are two-layer designs.
What is the most popular open source board using the LD1117S33?
By GitHub stars, Radioberry by pa3gsb, with 675 stars.
Can I simulate one of these boards using the LD1117S33 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.