4 open source boards using the LP2985
Real designs built with the LP2985, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Microchip SAM
Empyrean
etherkit
18.3 × 45.6 mm40 parts2LGPL-3.03AVR/Arduino
ArduinoMICRACK
seismicindustries
19 × 108 mm41 parts2LNo license2Radioberry preamp
pa3gsb
65 × 56 mm137 parts2LNo license675Radioberry preamp
saktheeswaranswan
65 × 56 mm137 parts2LNo license0
The LP2985 in open source designs
The gallery holds 4 open source boards using the LP2985 from 4 GitHub repositories; a typical one measures about 42 × 56 mm and carries around 89 components.
100% are two-layer designs, the rest use four layers or more, and 25% carry an open source license.
The most starred is Radioberry preamp by pa3gsb.
Parts used alongside the LP2985
Microcontrollers on boards using the LP2985
What boards using the LP2985 are built for
LP2985: common questions
Where can I find a LP2985 reference design?
Each of the 4 boards on this page is a real design using the LP2985. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the LP2985?
The INA199A1DC, LD1117S33, MAX11613, MCP4662 and ST1S10 appear in the most repositories here.
Which microcontrollers do boards using the LP2985 use?
Most are built on AVR/Arduino (1) and Microchip SAM (1).
How big is a typical board using the LP2985?
The median is 42 × 56 mm, and 100% are two-layer designs.
What is the most popular open source board using the LP2985?
By GitHub stars, Radioberry preamp by pa3gsb, with 675 stars.
Can I simulate one of these boards using the LP2985 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.