SignalForge multi
saufik-ramadhan·signalforge·hardware/SignalForge_multipcb/SignalForge_multipcb.kicad_pcb
About the SignalForge multi PCB
SignalForge multi is an open source ESP32 PCB design by saufik-ramadhan, published on GitHub under the Apache-2.0 license. It is a 4-layer board measuring 67 × 62.8 mm, with 62 components from 46 distinct parts.
Its main chip is the ESP32-S3-MINI-1-N8, from the ESP32 family. Other key parts include the TLV75801PDRV, DM-OLED096-636, TSDP343XX, ESD7104MUTAG and CP2102N-Axx-xQFN28. By type, the board carries 19 resistors, 15 capacitors, 7 ICs, 6 switches, 6 diodes and 4 connectors.
From the project
Swiss Army for Hackers
Main components on the SignalForge multi
SignalForge multi bill of materials (BOM)
62 components, 46 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-S3-MINI-1-N8 TP4057 | TSOT-23-6 | U1 |
| 1 | TLV75801PDRV ESP32-S3-MINI-1 | ESP32-S3-MINI-1 | U2 |
| 1 | DM-OLED096-636 USBLC6-2SC6 | SOT-23-6 | U3 |
| 1 | TSDP343XX TSDP343xx | Vishay_MOLD-3Pin | U4 |
| 1 | ESD7104MUTAG SPX3819M5-L-3-3 | SOT-23-5 | U5 |
| 1 | CP2102N-Axx-xQFN28 | QFN-28-1EP_5x5mm_P0.5mm_EP3.35x3.35mm | U6 |
| 1 | DM-OLED096-636 | PinSocket_1x04_P2.54mm_Vertical | U7 |
| 1 | AO3400A | TO-247-3_Vertical | Q1 |
| 2 | SS8050 | TO-247-3_Vertical | Q2, Q3 |
| 1 | CONN_01X08 Conn_01x08 | PinHeader_1x08_P2.54mm_Vertical | J1 |
| 1 | CONN_01X02 Micro_SD_Card_Det2 | microSD_HC_Hirose_DM3BT-DSF-PEJS | J2 |
| 1 | MICRO_SD_CARD_DET2 Conn_02x15_Top_Bottom | PinHeader_2x15_P2.54mm_Vertical | J3 |
| 1 | USB_C_Plug_USB2.0 | USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | P1 |
| 1 | Battery_Cell | SW_PUSH_6mm | BT1 |
| 1 | BOOT | SW_SPST_Omron_B3FS-105xP | SW1 |
| 1 | RST | SW_SPST_Omron_B3FS-105xP | SW2 |
| 4 | SW_Push | SW_SPST_Omron_B3FS-105xP | SW3, SW4, SW5, SW6 |
| 2 | LED | LED_D3.0mm_IRBlack | D1, D2 |
| 1 | IR204A STBY | LED_D3.0mm_IRBlack | D3 |
| 1 | CHRG | LED_D3.0mm_IRBlack | D4 |
Show 26 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | IR204A | LED_D3.0mm_IRBlack | D5 |
| 1 | PWRLED | LED_D3.0mm_IRBlack | D6 |
| 1 | 2n2 | L_0603_1608Metric | L1 |
| 1 | 0.1UF 10uF | C_0402_1005Metric | C1 |
| 1 | 0.1UF 100n | C_0402_1005Metric | C2 |
| 1 | 0.1UF 10u | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | C3 |
| 3 | 10UF 100n | C_0402_1005Metric | C4, C6, C8 |
| 1 | 100N 100n | C_0402_1005Metric | C5 |
| 1 | 2.2U 100n | C_0402_1005Metric | C7 |
| 1 | 2.2u | C_0402_1005Metric | C9 |
| 3 | 10u | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | C10, C13, C15 |
| 1 | 1u | C_0402_1005Metric | C11 |
| 1 | 100n | C_0402_1005Metric | C12 |
| 1 | 0.1u | C_0402_1005Metric | C14 |
| 4 | 1K | R_1206_3216Metric | R1, R3, R10, R16 |
| 1 | 10K 1K | R_1206_3216Metric | R2 |
| 1 | 5K1 1k | R_1206_3216Metric | R4 |
| 2 | 4K7 1k | R_1206_3216Metric | R5, R6 |
| 2 | 5k1 | R_1206_3216Metric | R7, R17 |
| 1 | 10K | R_1206_3216Metric | R8 |
| 1 | 200K 10K | R_1206_3216Metric | R9 |
| 2 | 5.1K 5k1 | R_1206_3216Metric | R11, R13 |
| 1 | 5.1K 33 | R_1206_3216Metric | R12 |
| 1 | 22K1 | R_1206_3216Metric | R14 |
| 1 | 47K5 | R_1206_3216Metric | R15 |
| 2 | 4k7 | R_1206_3216Metric | R18, R19 |
SignalForge multi design files
The KiCad project lives in the saufik-ramadhan/signalforge repository on GitHub; these links point at the commit this page was built from.
SignalForge multi: common questions
What microcontroller does the SignalForge multi use?
The SignalForge multi is built around the ESP32-S3-MINI-1-N8, from the ESP32 family.
How big is the SignalForge multi PCB?
The SignalForge multi measures 67 × 62.8 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the SignalForge multi?
62 components, from 46 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the SignalForge multi design files?
From the saufik-ramadhan/signalforge repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the SignalForge multi design in my own project?
Yes, under the terms of its Apache-2.0 license, which saufik-ramadhan chose for the repository.
Can I test firmware for the SignalForge multi without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in signalforge
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k