11 open source boards using the ESD7104MUTAG
Real designs built with the ESD7104MUTAG, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
Lego gameboy main
greigs
50.9 × 63.2 mm45 parts4LNo license14ESP32
Slate113-mk1
xeno3dev
96.7 × 67.8 mm609 parts8LCC-BY-NC-4.02ESP32
PCB V3.1
Jonathan-0101
80 × 160 mm287 parts4LGPL-3.01ESP32
LumaDD
xeno3dev
191.9 × 92.3 mm150 parts2LCC-BY-NC-4.00ESP32
SignalForge multi
saufik-ramadhan
67 × 62.8 mm62 parts4LApache-2.00ESP32
SilentAlarmClockPCB V1
remus4444
92.5 × 70.4 mm46 parts4LNo license0ESP32
WeatherStation
kermitsgonnakermicide
38.4 × 33.5 mm27 parts4LNo license0ESP32
PCB V2.2 PreAutoRoute
Jonathan-0101
80 × 161 mm286 parts4LGPL-3.01ESP32
PCB
saufik-ramadhan
42 × 72 mm39 parts4LApache-2.00ESP32
PCB V2.2 PreAutoRoute DimChange
Jonathan-0101
80 × 161 mm286 parts4LGPL-3.01ESP32
PCB V2.4 Backup
Jonathan-0101
80 × 161 mm286 parts4LGPL-3.01
How designs wire the ESD7104MUTAG
Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the ESD7104MUTAG connects to, and the resistors, capacitors and other passives placed on it.
- The 4_4 pin has a capacitor to GND on 3 of 7 designs, most often 1 µF (then 10 µF).
- The NC pins have a capacitor to GND on 3 of 7 designs, most often 1 µF (then 10 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VSSpin 3, 8 | Connected to: GND 100% | — |
| 4_4pin 4 | Connected to: A connector 43%, PCA9306DCUR 29% · V_USB 29% |
|
| NCpin 6, 7, 9, 10 | Connected to: Not connected 46% · a signal 46% |
|
3 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Lego gameboy main by greigs, Slate113-mk1 by xeno3dev, PCB V2.2 PreAutoRoute by Jonathan-0101 and WeatherStation by kermitsgonnakermicide.
The ESD7104MUTAG in open source designs
The gallery holds 11 open source boards using the ESD7104MUTAG from 7 GitHub repositories; a typical one measures about 80 × 72 mm and carries around 150 components.
91% use four copper layers or more, and 55% carry an open source license.
The most starred is Lego gameboy main by greigs.
Parts used alongside the ESD7104MUTAG
Microcontrollers on boards using the ESD7104MUTAG
What boards using the ESD7104MUTAG are built for
ESD7104MUTAG: common questions
Where can I find a ESD7104MUTAG reference design?
Each of the 11 boards on this page is a real design using the ESD7104MUTAG. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the ESD7104MUTAG 4_4 pin connected?
The 4_4 pin has a capacitor to GND on 3 of 7 designs, most often 1 µF (then 10 µF). Counted from the KiCad layouts of 7 open source designs using the ESD7104MUTAG.
How is the ESD7104MUTAG NC pin connected?
The NC pins have a capacitor to GND on 3 of 7 designs, most often 1 µF (then 10 µF). Counted from the KiCad layouts of 7 open source designs using the ESD7104MUTAG.
What parts are used alongside the ESD7104MUTAG?
The ESP32-S3-MINI-1-N8, TLV75801PDRV, CC1101RGPR and CH224K appear in the most repositories here.
Which microcontrollers do boards using the ESD7104MUTAG use?
Most are built on ESP32 (11).
How big is a typical board using the ESD7104MUTAG?
The median is 80 × 72 mm, and 9% are two-layer designs.
What is the most popular open source board using the ESD7104MUTAG?
By GitHub stars, Lego gameboy main by greigs, with 14 stars.
Can I simulate one of these boards using the ESD7104MUTAG before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.