Default.20261011-041011

Shmcandi·esp32-devkit-hardware·esp32c6/build/builds/default/default.20261011-041011.kicad_pcb

Default.20261011-041011 PCB layout, top view — open source ESP32 board by Shmcandi

About the Default.20261011-041011 PCB

Default.20261011-041011 is an open source ESP32 PCB design by Shmcandi, published on GitHub. It is a 2-layer board, with 22 components from 8 distinct parts.

Its main chip is the ESP32-S3-WROOM-1, from the ESP32 family. By type, the board carries 7 capacitors, 6 resistors, 3 connectors, 2 ICs, 2 switches and 2 diodes.

It belongs with the dev boards & breakouts, displays & leds and usb & debug tools designs in this gallery.

From the project

Production-grade ESP32-WROOM-32E and ESP32-S3 (N16R8) Dual USB-C development board PCB designs created with Atopile & KiCad 10

This repository contains production-ready, breadboard-compatible hardware designs for Espressif microcontroller development boards, architected using Atopile (code-defined electronics) and automated layout/routing with KiCad 10 and Freerouting:

1. pcb2: ESP32-WROOM-32E DevKit (CP2102/CH340 USB-to-UART bridge, auto-programming circuit, dual 19-pin DIP headers). 2. esp32c6: ESP32-S3 (N16R8) DevKit (Dual USB-C ports: Native USB OTG + Hardware UART via CH340C, Addressable SK6812MINI / WS2812B RGB LED on GPIO48, 16MB Flash, 8MB Octal PSRAM, dual 22-pin DIP headers, dedicated antenna keepout).

Default.20261011-041011, from the project README
From the project README

Default.20261011-041011 bill of materials (BOM)

22 components, 8 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
—
U1
1
—
U2
2
—
J1, J2
1
—
J3
2
—
SW1, SW2
2
—
D1, D2
7
—
C1, C2, C3, C4, C5, C6, C7
6
—
R1, R2, R3, R4, R5, R6

Default.20261011-041011 design files

The KiCad project lives in the Shmcandi/esp32-devkit-hardware repository on GitHub; these links point at the commit this page was built from.

Default.20261011-041011: common questions

What microcontroller does the Default.20261011-041011 use?

The Default.20261011-041011 is built around the ESP32-S3-WROOM-1, from the ESP32 family.

How big is the Default.20261011-041011 PCB?

The Default.20261011-041011 has 2 copper layers and is 1.6 mm thick.

How many components are on the Default.20261011-041011?

22 components, from 8 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Default.20261011-041011 design files?

From the Shmcandi/esp32-devkit-hardware repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the Default.20261011-041011 design in my own project?

The repository has no license, so all rights stay with Shmcandi. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Default.20261011-041011 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in esp32-devkit-hardware

Similar boards