Test routed
Shmcandi·esp32-devkit-hardware·pcb2/layouts/default/test_routed.kicad_pcb
About the Test routed PCB
Test routed is an open source ESP32 PCB design by Shmcandi, published on GitHub. It is a 2-layer board measuring 30 × 60 mm, with 26 components from 17 distinct parts.
Its main chip is the ESP32-WROOM-32E, from the ESP32 family. Other key parts include the AMS1117-3.3 and CH340C. By type, the board carries 8 capacitors, 7 resistors, 3 ICs, 3 connectors, 2 transistors and 2 switches.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
Production-grade ESP32-WROOM-32E and ESP32-S3 (N16R8) Dual USB-C development board PCB designs created with Atopile & KiCad 10
Main components on the Test routed
Test routed bill of materials (BOM)
26 components, 17 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U1 |
| 1 | ESP32-WROOM-32E | ESP32-WROOM-32 | U2 |
| 1 | CH340C | SOP-16_4.4x10.4mm_P1.27mm | U3 |
| 2 | MMBT3904 | SOT-23 | Q1, Q2 |
| 1 | HDR-L | PinHeader_1x19_P2.54mm_Vertical | J1 |
| 1 | HDR-R | PinHeader_1x19_P2.54mm_Vertical | J2 |
| 1 | USB-C | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J3 |
| 1 | BOOT | SW_Push_SPST_NO_Alps_SKRK | SW1 |
| 1 | EN | SW_Push_SPST_NO_Alps_SKRK | SW2 |
| 1 | RED | LED_0603_1608Metric | D1 |
| 1 | 1uF | C_0603_1608Metric | C1 |
| 2 | 10uF | C_0603_1608Metric | C2, C4 |
| 4 | 100nF | C_0603_1608Metric | C3, C5, C7, C8 |
| 1 | 22uF | C_0603_1608Metric | C6 |
| 4 | 10k | R_0603_1608Metric | R1, R4, R5, R7 |
| 2 | 5.1k | R_0603_1608Metric | R2, R3 |
| 1 | 1k | R_0603_1608Metric | R6 |
Test routed design files
The KiCad project lives in the Shmcandi/esp32-devkit-hardware repository on GitHub; these links point at the commit this page was built from.
Test routed: common questions
What microcontroller does the Test routed use?
The Test routed is built around the ESP32-WROOM-32E, from the ESP32 family.
How big is the Test routed PCB?
The Test routed measures 30 × 60 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Test routed?
26 components, from 17 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Test routed design files?
From the Shmcandi/esp32-devkit-hardware repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Test routed design in my own project?
The repository has no license, so all rights stay with Shmcandi. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Test routed without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in esp32-devkit-hardware
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k