Default.20261011-042853
Shmcandi·esp32-devkit-hardware·esp32c6/build/builds/default/default.20261011-042853.kicad_pcb
About the Default.20261011-042853 PCB
Default.20261011-042853 is an open source ESP32 PCB design by Shmcandi, published on GitHub. It is a 2-layer board, with 33 components from 11 distinct parts.
Its main chip is the ESP32-S3-WROOM-1, from the ESP32 family. By type, the board carries 10 resistors, 9 capacitors, 4 connectors, 3 ICs, 3 diodes and 2 transistors.
It belongs with the dev boards & breakouts, displays & leds and usb & debug tools designs in this gallery.
From the project
Production-grade ESP32-WROOM-32E and ESP32-S3 (N16R8) Dual USB-C development board PCB designs created with Atopile & KiCad 10
This repository contains production-ready, breadboard-compatible hardware designs for Espressif microcontroller development boards, architected using Atopile (code-defined electronics) and automated layout/routing with KiCad 10 and Freerouting:
1. pcb2: ESP32-WROOM-32E DevKit (CP2102/CH340 USB-to-UART bridge, auto-programming circuit, dual 19-pin DIP headers). 2. esp32c6: ESP32-S3 (N16R8) DevKit (Dual USB-C ports: Native USB OTG + Hardware UART via CH340C, Addressable SK6812MINI / WS2812B RGB LED on GPIO48, 16MB Flash, 8MB Octal PSRAM, dual 22-pin DIP headers, dedicated antenna keepout).

Default.20261011-042853 bill of materials (BOM)
33 components, 11 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | — | SOT-223-3_TabPin2 | U1 |
| 1 | — | ESP32-S3-WROOM-1 | U2 |
| 1 | — | SOP-16_4.4x10.4mm_P1.27mm | U3 |
| 2 | — | SOT-23 | Q1, Q2 |
| 2 | — | PinHeader_1x22_P2.54mm_Vertical | J1, J2 |
| 2 | — | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J3, J4 |
| 2 | — | SW_Push_SPST_NO_Alps_SKRK | SW1, SW2 |
| 2 | — | LED_0603_1608Metric | D1, D2 |
| 1 | — | LED_SK6812MINI_PLCC4_3.5x3.5mm_P1.75mm | D3 |
| 9 | — | C_0603_1608Metric | C1, C2, C3, C4, C5, C6, C7, C8 +1 |
| 10 | — | R_0603_1608Metric | R1, R2, R3, R4, R5, R6, R7, R8 +2 |
Default.20261011-042853 design files
The KiCad project lives in the Shmcandi/esp32-devkit-hardware repository on GitHub; these links point at the commit this page was built from.
Default.20261011-042853: common questions
What microcontroller does the Default.20261011-042853 use?
The Default.20261011-042853 is built around the ESP32-S3-WROOM-1, from the ESP32 family.
How big is the Default.20261011-042853 PCB?
The Default.20261011-042853 has 2 copper layers and is 1.6 mm thick.
How many components are on the Default.20261011-042853?
33 components, from 11 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Default.20261011-042853 design files?
From the Shmcandi/esp32-devkit-hardware repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Default.20261011-042853 design in my own project?
The repository has no license, so all rights stay with Shmcandi. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Default.20261011-042853 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in esp32-devkit-hardware
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k