9 open source boards using the ESP32-POE

Real designs built with the ESP32-POE, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

9 boardsClear filters|Most starred

The ESP32-POE in open source designs

The gallery holds 9 open source boards using the ESP32-POE from 4 GitHub repositories; a typical one measures about 149.3 × 90.2 mm and carries around 37 components.

100% are two-layer designs, the rest use four layers or more, and 56% carry an open source license.

The most starred is ESP-relay-6ch by koson.

Microcontrollers on boards using the ESP32-POE

What boards using the ESP32-POE are built for

ESP32-POE: common questions

Where can I find a ESP32-POE reference design?

Each of the 9 boards on this page is a real design using the ESP32-POE. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the ESP32-POE use?

Most are built on ESP32 (9).

How big is a typical board using the ESP32-POE?

The median is 149.3 × 90.2 mm, and 100% are two-layer designs.

What is the most popular open source board using the ESP32-POE?

By GitHub stars, ESP-relay-6ch by koson, with 0 stars.

Can I simulate one of these boards using the ESP32-POE before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part