Untitled
Simonhajd·Triton-Float·Controlexp/magruler/Untitled/Untitled.kicad_pcb
About the Untitled PCB
Untitled is an open source PCB design by Simonhajd, published on GitHub. It is a 2-layer board measuring 10 × 110 mm, with 9 components from 5 distinct parts.
Other key parts include the TMAG5273A1QDBVR. By type, the board carries 3 ICs, 3 capacitors, 1 connector, 1 diode and 1 resistor.
It belongs with the rf & radio and sensors designs in this gallery.
From the project
Float Repo for the 2026 Triton Float
Development repository for the 2026 Triton Robotics Float.
The Triton Float is being developed for the 2026 MATE ROV Pioneer competition (Newfoundland). This design iteration is approximately 33% smaller than last year's model, while targeting more than 2× performance improvements in speed and significantly increased precision through layered redundancy and sensor feedback systems. It also includes a dedicated LoRa radio as opposed to last year's 4cm wire antenna, which will increase the reliability and robustness of the system.
Main components on the Untitled
Untitled bill of materials (BOM)
9 components, 5 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | TMAG5273A1QDBVR | DBV0006A-IPC_A | U2, U3, U4 |
| 1 | CONN_01X04_PIN Conn_01x04_Pin | JST_GH_BM04B-GHS-TBT_1x04-1MP_P1.25mm_Vertical | J1 |
| 1 | RED | LED_0805_2012Metric | D1 |
| 3 | 100NF 100nF | C_0201_0603Metric | C1, C2, C3 |
| 1 | 220 | R_0603_1608Metric | R3 |
Untitled design files
The KiCad project lives in the Simonhajd/Triton-Float repository on GitHub; these links point at the commit this page was built from.
Untitled: common questions
How big is the Untitled PCB?
The Untitled measures 10 × 110 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Untitled?
9 components, from 5 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Untitled design files?
From the Simonhajd/Triton-Float repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Untitled design in my own project?
The repository has no license, so all rights stay with Simonhajd. Use it as a reference, and ask the author before reusing the design.
More boards in Triton-Float
Similar boards
Sensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2kSensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8kMicrophone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kPots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956USB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956