Lax

smoore2386·lax-pcb·laxpod_esp32s3/laxpod_esp32s3.kicad_pcb

Lax PCB layout, top view — open source ESP32 board by smoore2386

About the Lax PCB

Lax is an open source ESP32 PCB design by smoore2386, published on GitHub. It is a 2-layer board measuring 18 × 25 mm, with 34 components from 21 distinct parts.

Its main chip is the ESP32-S3-MINI-1-N8, from the ESP32 family. Other key parts include the MPU-6050, BMM150, TP4056 and MCP1700T-3302E/TT. By type, the board carries 12 capacitors, 10 resistors, 5 ICs, 4 diodes, 2 connectors and 1 switch.

It belongs with the power & battery designs in this gallery.

From the project

Board: 18.0 mm × 25.0 mm, 2-layer, 1.6 mm FR-4, ENIG MCU: Espressif ESP32-S3-MINI-1-N8 (pre-certified FCC/CE/IC, integrated antenna) IMU: TDK MPU6050 (6-axis) + Bosch BMM150 (3-axis magnetometer) on shared I²C Power: USB-C charge → TP4056 → LiPo (JST-PH 2.0 mm) → MCP1700-3302 LDO

Board: 18.0 mm × 25.0 mm, 2-layer, 1.6 mm FR-4, ENIG MCU: Espressif ESP32-S3-MINI-1-N8 (pre-certified FCC/CE/IC, integrated antenna) IMU: TDK MPU6050 (6-axis) + Bosch BMM150 (3-axis magnetometer) on shared I²C Power: USB-C charge → TP4056 → LiPo (JST-PH 2.0 mm) → MCP1700-3302 LDO → 3.3 V Target enclosure: inside 1.6″ lacrosse butt-cap

Honest statement: I cannot produce a trustworthy routed PCB or valid Gerber set by hand-writing files. Gerber files that I fabricate as text without running KiCad's plot engine will produce an unroutable, shorted, or unmanufacturable board. The path forward is:

Main components on the Lax

Lax bill of materials (BOM)

34 components, 21 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ESP32-S3-MINI-1-N8
U1
1
MPU-6050
MPU6050
U2
1
BMM150
U3
1
TP4056
U4
1
MCP1700T-3302E/TT
MCP1700-3302E/TT
U5
1
TYPE-C-31-M-12
USB-C-6P
J1
1
B2B-PH-K-S
JST-PH-2P
J2
1
TS-1187A-B
SW_Push
SW1
1
WS2812B-2020
D1
1
19-217/GHC-YR1S2/3T
CHG
D2
1
19-217/BHC-ZL1M2RY/3T
STDBY
D3
1
SS14
D4
3
CL10A106KP8NNNC
10uF
C1, C2, C5
3
CL05A105KA5NNNC
1uF
C3, C4, C12
5
CC0402KRX7R9BB104
100nF
C6, C7, C9, C10, C11
1
CC0402KRX7R9BB103
10nF
C8
1
0402WGF4701TCE
4.7k
R1
2
0402WGF5101TCE
5.1k
R2, R3
4
0402WGF1002TCE
10k
R4, R5, R6, R7
2
0402WGF1001TCE
1k
R8, R9
Show 1 more
QtyPartRefs
1
0402WGF0000TCE
0R
R10

Lax design files

The KiCad project lives in the smoore2386/lax-pcb repository on GitHub; these links point at the commit this page was built from.

Lax: common questions

What microcontroller does the Lax use?

The Lax is built around the ESP32-S3-MINI-1-N8, from the ESP32 family.

How big is the Lax PCB?

The Lax measures 18 × 25 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Lax?

34 components, from 21 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Lax design files?

From the smoore2386/lax-pcb repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Lax design in my own project?

The repository has no license, so all rights stay with smoore2386. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Lax without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards