20 open source boards using the BMM150
Real designs built with the BMM150, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Nordic nRF
AWatch2-hw
jwise
73.4 × 72.7 mm157 parts4LNo license18RP2040/RP2350
MuHack-Badge
MrMoDDoM
100 × 100 mm117 parts2LAGPL-3.08STM32
FlightController H743
nikipoatgit
47 × 60 mm56 parts2LGPL-3.05STM32
Flight-Computer
SunDevilRocketry
93.7 × 43.7 mm109 parts4LNo license4ESP32
CopterCat cm4
matveylapin
40 × 55 mm156 parts4LApache-2.03STM32
ProPrj Project Ignis 2026-06-03
Shourya-x
123.2 × 67.9 mm71 parts2LNo license3STM32
Icarus
nnarain
37.1 × 43.3 mm43 parts4LNo license1STM32
Pcb mantis
si-nalsal
125.2 × 90 mm277 parts6LCERN-OHL-S-2.00STM32
CC M7
OzanE1
40 × 65 mm126 parts4LLGPL-2.10STM32
Jfox fmu
Jettanakorn
100 × 80 mm125 parts6LNo license0STM32
CC M7
OzanE1
40 × 65 mm123 parts4LLGPL-2.10STM32
Custom flight controller
Ekta-Gupta27
51 × 53.5 mm122 parts6LNo license0RP2040/RP2350
MWatch
mincrmatt12
89.9 × 88.8 mm105 parts4LNo license0RP2040/RP2350
Quad0
Person-0
60 × 50 mm81 parts4LNo license0STM32
Flight controller
epicgrowl
50 × 50 mm59 parts4LNo license0ESP32
CRASHSENSE
ParthDhiman32
96 × 60.1 mm48 parts4LMIT0ESP32
Lax
smoore2386
18 × 25 mm34 parts2LNo license0Multi-Sensor
AungChoOo
23 × 35 mm21 parts4LMIT0ESP32
MissionBus
wasa-rockoon
60 × 60 mm136 parts2LMIT1RP2040/RP2350
RCS
wasa-rockoon
60 × 70 mm111 parts2LMIT1
How designs wire the BMM150
Read from the KiCad layouts of 18 open source designs, one per repository: what each pin of the BMM150 connects to, and the resistors, capacitors and other passives placed on it.
- The VDD pin has a decoupling capacitor on 16 of 17 designs, most often 100 nF (then 1 µF).
- The VDDIO pin has a decoupling capacitor on 15 of 17 designs, most often 100 nF (then 2.2 µF).
- The SCK pin has a pull-up to 3.3V on 12 of 17 designs, most often 4.7 kΩ (then 10 kΩ).
- The SDI pin has a pull-up to 3.3V on 12 of 17 designs, most often 4.7 kΩ (then 10 kΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| PSpin A1 | Connected to: 3.3V 71% · a signal 18% | — |
| SCKpin A3 | Connected to: The microcontroller 65%, BMP388 24% |
|
| CSBpin A5 | Connected to: GND 65% · a signal 18% | — |
| VDDIOpin B2 | Connected to: 3.3V 82% · a signal 18% |
|
| SDIpin B4 | Connected to: The microcontroller 65%, BMP388 24% |
|
| SDOpin C1 | Connected to: GND 82% · a signal 18% | — |
| GNDpin C5, E1, E3 | Connected to: GND 100% | — |
| INTpin D2 | Connected to: Not connected 65% · a signal 35% | — |
| VDDpin E5 | Connected to: 3.3V 82% · a signal 18% |
|
1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include AWatch2-hw by jwise, MuHack-Badge by MrMoDDoM, FlightController H743 by nikipoatgit and Flight-Computer by SunDevilRocketry.
The BMM150 in open source designs
The gallery holds 20 open source boards using the BMM150 from 19 GitHub repositories; a typical one measures about 60 × 60 mm and carries around 110 components.
70% use four copper layers or more, and 50% carry an open source license.
The most starred is AWatch2-hw by jwise.
Parts used alongside the BMM150
Microcontrollers on boards using the BMM150
What boards using the BMM150 are built for
BMM150: common questions
Where can I find a BMM150 reference design?
Each of the 20 boards on this page is a real design using the BMM150. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the BMM150 VDD pin?
The VDD pin has a decoupling capacitor on 16 of 17 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 18 open source designs using the BMM150.
What decoupling capacitors do designs use on the BMM150 VDDIO pin?
The VDDIO pin has a decoupling capacitor on 15 of 17 designs, most often 100 nF (then 2.2 µF). Counted from the KiCad layouts of 18 open source designs using the BMM150.
What pull-up resistor is used on the BMM150 SCK pin?
The SCK pin has a pull-up to 3.3V on 12 of 17 designs, most often 4.7 kΩ (then 10 kΩ). Counted from the KiCad layouts of 18 open source designs using the BMM150.
What parts are used alongside the BMM150?
The AMS1117-3.3, BMI088, BMI270, BMP388 and ICP-20100 appear in the most repositories here.
Which microcontrollers do boards using the BMM150 use?
Most are built on STM32 (10), ESP32 (4), RP2040/RP2350 (4) and Nordic nRF (1).
How big is a typical board using the BMM150?
The median is 60 × 60 mm, and 30% are two-layer designs.
What is the most popular open source board using the BMM150?
By GitHub stars, AWatch2-hw by jwise, with 18 stars.
Can I simulate one of these boards using the BMM150 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.